Punjab State Power Corporation Limited - Punjab

33155191 procurement of personal protective equipment ppes for the employee of ggsstp rupnagar procurement of personal protective equipment ppes for the employee of ggsstp rupnagar , head protection: industrial safety helmet: 8 point suspension with standard accessory slot for attachment like ear muff face shield is marked as per is 2925 1984 and approved under ansi z89.1 2014 type 1, class e / en: 397 ( adjustable size 540 to 590 mm ) .or the latest is / en with proof. , white , yellow , welding helmet , ear protection. , ear plugs: foam / cotton corded in poly bags / carry case, nrr 32db, conform to is 9167 / en: 352, or the latest is / en with proof. , ear muff: cushioned headband, nrr 32db, conform to is 9167 / en: 352, or the latest is / en with proof. , respiratory protection. , respirator ( without valve ) : standard • noish approved n95 particulate respirator. • meets noish 42cfr 84 n95 requirement for a minimum 95% filtration efficiency against solid and liquid aerosols that do not contain oil. • test against particles approximately 0.3 micron in size ( mass median aerodynamic diameter ) per 42 cfr 84. • osha assigned protection facrtor ( apf ) 10. noish approved , respirator ( with valve ) : this specification cover the requirement of a valve dust mist disposable respirator compliance with standard ce approved to en 149:2001+a1:2009 ffp2 nr d filtering face piece particulate respirator.noish approved , respirator ( half mask ) it should be a half face piece reusable respirator made of advance silicon face seal to sit lower on the nose bridge to help improve eyewear compatibility. face seal should have silicon flex joint designed over noise bridge to reduce pressure & provide a softer feel for more comfort on the wearer’s face. , gas filter for respirator: applicable for organic vapour / inorganic / acid / ammonia gas isi marked as per is 15323: 2002 or ansi / ce marked en: 14387: 2004, or the latest is / ce marked en with proof. , eye protection , safety goggles impact protector ( dust, grinding ) : hard coated clear polycarbonate lenses with side shield as per is 5983: 1980 / ce marked en: 166 / ansi z87.1.2003, or the latest is / ce marked en with proof. , welding goggles: fitted with ir 5 / 11 lens, as per is: 5983:1980 or ansi / ce marked en: 166 / 169. or the latest is / ce marked en with proof. , welding hand screen: flat fronted flame retardant with concealed handle as per is 1179: 2008, en 175:1997 or the latest is with proof. , welding head screen adjustable, flat front, flame retardant as per is 1179: 2008 or ansi / ce marked , welding glass ( black ) : black welding glass size 4.25” x 3.25” ce marked en166, or the latest is / ce marked en with proof. , welding glass ( white ) : white welding glass size 4.25” x 3.25” ce marked en166, or the latest is / ce marked en with proof. , hand protection. , leather hand gloves: as per is 6994 ( part 1 ) : 1973, ce marked, en:388 size 14”, or the latest is / ce marked en with proof. , do size 16’’ , chemical resistant hand gloves; made of pvc, neoprene, nit rile, ce marked en: 374 ( size 14” / 16” ) , or the latest is / ce marked en with proof. , heat resistant hand gloves ( asbestos free ) : heat resistant fabric & leather back & cuff with woollen liningas per is 2573: 1986 / ce marked en: 407 ( size 14” / 16” ) for employee working on hot equipment , electrical shock proof gloves: tested as per en 60903:2003, iec 60903 2014, class 00, or the latest is / ce marked en with proof. , shock proof seamless rubber hand gloves soft and flexible quality insulated and tested potential 2500 volts, working potential: 500 volts class 00. as per en 60903 2003, iec 60903 2014 or the latest is as per bis. , foot protection: safety shoes ( mechanical job ) ; with steel toe is marked as per is: 15298 ( part 2 ) : 2011, en:iso20345:211 s1, ci, class e or the latest is as per bis, having brand of liberty, bata, karam & lee copper. , size 5 no , size 6 no , size 7 no , size 8 no , size 9 no , size 10 no , size 11 no , safety shoes ( electrical job ) : with fiber toe as per is: 15298 ( part 2 ) : 2011. , en:iso20345:211 s1, ci, or the latest is as per bis having brand of liberty, bata, karam & lee copper. , size 5 no , size 6 no , size 7 no , size 8 no , size 9 no , size 10 no , pvc gum boots: is: 12254:1993, or the latest is as per bis, having brand of vaultex, bata, liberty , size 6 no , size 7 no , size 8 no , size 9 no , fall protection. , full body safety belt / harness, class a: design:1 ) dorsal attachment d ring for fall arrest 2 ) adjustable leg straps 3 ) adjustable chest straps 4 ) side straps 5 ) made up of elastic wabbing for more comfort and impact resistance. webbing: a ) material: polyester, b ) width: 44+ 1mm, c ) breaking strength:23kn. stitching thread material: high tenacity polyester. madel component 1 ) material: aluminium, 2 plating: black anodize finish: matt. vital test compliance 1 ) static strength: 15kn or 1530 kgf for 3 minutes at each attachment element. 2 ) dynamic strength: free fall from 4mtrs. height donned to a test dummy weighing 100kg at each attached element. weight: 1006gm + 10gm.consisting with pn 204 lanyard, two chest and one dorsal attachment d ring, ce marked en 361:2002 having brand of karam, ufs, 3m. , body protection , chemical resistant apron: as per is 15071: 2002 / ce marked en: 14605, or the latest is / ce marked en with proof. , dangri / raincoat: for protection from rain. , medium , large , extra large , extra extra large , laboratory apron , chrome leather apron , leather leg guard 18 , leather armguard 18 , fire safety suit ( jacket & trouser ) consisting of 3 layers along with fire hood, outer layer is of 200 gsm nomex fabric. middle layer consist of 50% nomex and 50 % viscose. third / thermal layer is of carbon filled laminated with 50% nomex and 50% viscose. the coat must meet the nfpa 1971 ; 2007 or en 469 : 2005 level 2 standards. the coaler of the coat should be designed so that the neck portion is doubly secured abd covered by mains of a throat tab, fitted with fire retardant velcrofor secure fastening across the neck. coat should be provided with 3 pockets as standards. 2 waist pockets on the lower fronts with flap closer and 1 patch pocket inside the court . the size should be suitable for fitting of person of 5’8” height and length of jacket should be 32” inch. the outer clothe should be made from inherently flame resistance para aramid fibber material with requisite blend of antistatic fibber. boots standards: certified to en 15090: 2012 type 3 or nfpa 1971: 2007 ( size 8 ) . the boots should be certified en 374 3 against resistance to dangerous chemical that is n heptane, sodium hydroxide, sulphuric acid & en 943 2 against chlorine, hydrogen chlorine, ammonia or equivalent nfpa standards. helmet standards certified to en 443: 208 or nfpa 1971: 2007. gloves standards certified to en 659: 2008 or nfpa 1971:2007. anti fire hoods standards certified to en 13911: 2004 in connections with en 340: 2003 or nfpa 1971 & 70e standards. test of acceptance as per nfpa 1976 a ) heat, flame, char resistance test, b ) tear test, c ) water absorption, d ) non conductivity test, e ) impact test for helmet and face shield , f ) reflective index / refractive index, g ) weight, h ) thermal protection test. composite suit fire test: suit should be capable of protecting wearer for 2 minutes against 3w / cm2 heat & 1 minute for 8w / cm2 , self contained open circuit automatic positive pressure compressed air breathing apparatus set en 137:2006 type 2 & cbrn approved, with 6.8 ltrs. / 300 bar aluminium lined fully wrapped carbon composite material compressed air cylinder approved to en12245 & ce marked, as per following specification 1. scba set: ce marked en 137:2006 type 2 approval and cbrn approval. 2. face mask: en 136: class 3 and ds 8468 1: 2006. 3. cylinder: ce marked en 12245 & chief controller of explosives ( ccoe ) nagpur approved, 4. cylinder valve: en 144 approved. copy of the above all approvals shall be required at the time of inspection. guarantee a ) the manufacturer shall give the guarantee of min 12 calendar months from the date of supply of goods against any manufacturing effects. b ) the manufacture shall also give guarantee for supply of spares and service for minimum period of 10 years from date of supply of goods. free training to the user shall be the provided by the supplier at our site. , breathing apparatus set ( canister type ) , full face mask moulded, chemical resistance rubber with double reflex sealing flap, 1 ) compressed air cylinder: seamless high tensile steel up to 300 bar, 2 ) cylinder valve: forged high tensile brass as per is: 7302, 3 ) air hose pipes: both high and low pressure hoses shall be made from chemical. rubber & connected with ss 316 connector, 4 ) speech diaphragm rubber, 5 ) pressure gauge is readable in bars / psi, 6 ) black plate specially made for stress free operation.or as per is 14166: 1994 confirming to en: 148 1for threading, screw in canister, conforming to is 5323:2003 or the latest is / ce marked en with proof. , pvc hand pump for transfer of chemicals liquid, rotary style, plastic / ryton construction wetted parts: pps, 304ss & ptfe, maximum flow rate: 400ml per rev, maximum velocity: 410 cst, 1 inch curved spout, 2 inch bung adaptor, 1060mm suction pipe c / w filter, suitable for drums upto 205 ltrs. description: 400ml per reb, 2 inch m bsp drum adaptor, 1060mm down tube, 27mm bent spout, chemicals. , wind sock with stand...

Indian Air Force - Punjab

20156358 request for proposal for purchase of self contained air breathing apparatus ( scaba ) gig no 1133756 ) => limited....