cable box Tenders in Punjab

1
Department of Cooperation - Punjab

35453912 electrical sub station expansion including supply installation testing and commissioning of various electrical items 2 g.i. plate earthingearthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories like gi earth strip 12 0 long size 50x5mm and providing masonary enclosure ( 300mmx300mmx300mm clear ) with ci cover plate having locking arrangement and watering pipe of 2.7 meter long, funnel, funnel dummy cover threaded etc. with charcoal / coke and salt as required. ( trf. body 2, main lt panel body 2 ) 3 copper plate earthingearthing with copper earth plate 600 mm x 600 mm x 6 mm thick including accessories like cu earth strip 12 0 long size 50x5mm and providing masonry enclosure ( 300mmx300mmx300mm clear ) with ci cover plate having locking arrangement and watering pipe of 2.7 meter long, funnel, funnel dummy cover threaded etc. with charcoal / coker and salt as required. ( trf. neutral 2 + 2 ) 4 providing and fixing 50 mm x 5 mm copper strip on surface or in recess for connections etc. as required. ( for transformer neutral ) 5 providing and fixing 50 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required. ( transformer body, main lt panel & sub panels ) 6 dwc hdpe pipesupplying and laying of folowing size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete with fittting and cutting, jointing etc, direrct in ground ( 75 cm below ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. 7 double walled corrugate hdpe pipe ( od 90 mm & id 76 mm outer / inner dia ) 8 double walled corrugate hdpe pipe ( od 180 mm & id 152 mm outer / inner dia ) 9 section b 10 11kv ht system: 11kv, ht cable 11 supply, testing & commissioning of circular aluminium conductor, conductor screened with extruded semiconducting compound, xlpe insulated, insulation screened with extruded semiconducting combination in combination with copper tape ( 0.3ka for 1 sec. ) cores laid up, frls pvc inner sheathed, galvanised steel strip armoured and overall frls pvc sheathed cable confirming to is : 7098 ( part 2 ) , 2011, working voltage 11kv ( e ) grade size 3core 240sqmm 12 s / i / t / c of heat shrinkable cable end termination joint kit for 11kv ( e ) , xlpe cable as approved by enginner incharge of the site : 13 heat shrinkable end termination kit 3c x 240sqmm ( out door type ) 14 heat shrinkable end termination kit 3c x 240sqmm ( in door type ) 15 misc items for sub staion 16 supply and fixingofsafety instruction chart in word duly framed with 5 mm thick glass as required. ( approx. front area 1.20 sq mtrs. ) 17 supply & fixing shock treatmernt chart duly mounted on a wooden frame with 5 mm thick glass as required. ( approx. front area 1.20 sq mtr ) 18 provding & fixing of rubber mat with ( bottom side of mat shall anti skid type ) of size 1 mtr wide x 5 mtr long, laid in front and back side of the panels. thickness of the mat shall be 2.5 mm thick to withstand 11 kv dielectric strength as per is is 15652 : 2006, superseding is 5424 :1969 old standard ( colour black / blue ) isi engrved 19 providing first aid box as approved bt st. john ambulance brigade / indian red cross conforming to is 2217 :1963 ( main lt panel room 1 & wh panel room ) 20 2000kva transformer as per is 1180, level ii ( after ist april level i ) desgn, manufacture, supply, loading, transportation to siteof 2000kva, 11kv / 433volts, 3 phase, 50hz, delta / star connected, outdoor type distribution transformer with ( oltc ) on load tap changer ( tap changer shall be with manual & auto option ) , oil immersed, onan cooled, complete with all fittings such as oil conservator, silica gel breather, thermometer, explosion vent, diagram and rating plate, magnetic oil gauge ( alarm contact ) , oil temperature indicator ( alarm & trip ) , winding temperature indicator ( alarm & trip ) and buccholtz relay ( alarm & trip ) , pressure relief valve with ( alarm & trip contact ) , wiring upto marshalling box with copper armoured cable and cables shall be properly secured, cablesshall be terminated withdouble compressed cable glands, lifting lugs, first fill of oil ( brand new oil shall be used ) , weather proof ht cable box suitable for termination of 3c x 240sqmm xlpe insulated cable andlt side cable box and coppper bus shall be suitable for termination of 10r x 4c x 400sqmm, solid copper neutral through bush shall be brought out for earthing, gland plate shall be non magnetic material & 8mm thick etc. the oltc shall be provided with rtcc & avr control box, oltc shall have 17position steps+5% to 15% in the 1.25% per step increase or decrease. the oltc also have the arrnagement for manual operation with help og handle.complete as per specifications including 5% extra oil in non returnable drum for topping up as required. refer is 2026 part i to v for power transformer and for oil is 335 ( the transformer shall be completely type tested as per relevant standard and vendor shall submit all ttr to client for review and approval ) , all routine test / acceptance tests shall be performed as per reference standard at works and at site and all test cerfificates shall be provided to the client ) . break down value ( bdv ) at the time of commissioning ( bdv shall bein the scope of contractor including erection, control & power cabling ) . all site tests & commissioning shall be as per is code are in the scope of supplier, complete in all respect as required.owner has right to witness the testing of transformer and for this supplier to submit qap along with documents required to be approved and provide the date for witnessing the testing before dispatch. 21 note : 1.site testing and commissioning shall be in scope of supplier.however electrical contractor to provide labour for assistance during testing.2. bdv is less than required value ( 30kv ) electrical contactor has to carry out the de hydration of transformer oil.make of transformer: schneider, cgl, voltamp, kirloskar make of oltc: ctr 22 vector group: dyn 11 23 insulation class: b 24 windings : copper wound 25 on load tap changer ( oltc ) : +5% to 15% in 17 step and per step 1.25% increase or decrease 26 input voltage: 9 to 12kv, 3?, 50hz 27 output voltage: 433volts, 28 ambient temperature 50°c 29 temperature rise above ambient temperature: as per is 1180 30 impedance : as per is : 2026 31 terminal arrangement cable box ( hv ) : 1r x 3c x 240sqmm 32 terminal arrangement cable box ( lv ) : 10r x 4c x 400sqmm 33 all other standard accessories like name plate, rollers, lifting hook, oil indicator window / guage etc. complete as per respective standards. 34 wti, oti, bucholz alarm & trip and pressure relief valve with alarm & trip, oil level low alarm with alarm & trip contact 35 transformer oil de hydrationtransformer to be dehyrated if the bdv value is less then 35kv at 2.5mm distance while testing oil temperature shall be normal. minimum 3 samples shall be tested from the same source, after de hyderation bdv shall not be less than 50kv. dehyderation shall be inthe scope of electrical contrctor. 36 removing of existing 630kva transformerdisconnect all cables , remove from the existing location / foundation, shift / transport from foundation to store located within verka premises ( asper owner guidance ) including packing with polythene sheet and disconnecting all cables, cts in the 630kva transformer vcb. 37 removing, shifting of existing 1000kva transformerdisconnect all cables, remove, shift / transport the 1000kva existing transformer from existing location / foundation to the site of 630kva transformer ( asper owner guidance ) includingdisconnecting all cables, ct in vcb, oltc / rtcc and re installation, testing ( required at site before commissioning ) , connecting all ht, lt & control cables between transformer, vcb & oltc / rtcc.including ct required for apfc relay 1600 / 5a, cl 1.0, burden 10va. complete in all respect as required by the engineer incharge of the site. 38 11kv ct for 2000kva transformers / i / t / c of 11 kv ct as per existing ericon makenasik 10, ratio 120 / 1, cl 1.0, 5va, stc 21.0ka / 30sec. to be installed at 11kv rmu / sf6 for 2000kva transformer. including existing ct shall be disconnected, removed & insert / fix new ct, re connect all terninals to make operational. the old ct shall be handed over to client duly packed polythien sheet for storing. complete in all respect as required by the engineer in charge of the site. 39 11kv ct for 2000kva transformers / i / t / c of 11 kv ct as per existing ericon makenasik 10, ratio 120 / 1a, cl 5p 10, 10va, stc 21.0ka / 3sec. to be installed at 11kv rmu / sf6 for 2000kva transformer. including existing ct shall be disconnected, removed & insert / fix new ct, re connect all terninals to make operational. the old ct shall be handed over to client duly packed polythien sheet for storing. complete in all respect as required by the engineer in charge of the site. 40 1000kva transformer apfc paneldisconnect, shift, install, testing & commissioning of apfc panel at approx 10mtr away within sub station building, connect all power & control cable including earthing the panel. the same shall be commissioned at new location for the 1000kva transformer which is being shifted inplace of 630kva transformer. complete in all respect as required by the engineering incharge of the site. 41 section c 42 ection c _ lt power cables and control cables 1.1kv aluminium conductor power cables ( direct burried ) supply, handling, shifting, laying, testing and commissioning of the aluminium / copper conductorxlpe insulated, pvc sheathed, armoured and served cable 1100v grade as per is : 7098 ( part 1 ) 1988 and is 1554 ( part 1 ) for pvc insulated cables to be laid in 0.75 meter below ground level [ excluding excavation, sand cushioning ( 1 sand below & 4 above the cable ) covering with sand and first class bricks and back filling the trench etc. ] of the required size as per pwd general specifications. power & control cables shall be segregated by using brick and one cable dia spacing shall be maintained between the cables. 43 3.5c x 400 sqmm a2xfy cable 44 2c x 2.5 sqmm cu. ( ywy ) cablefor power supply to marshalling box 45 4c x 2.5 sqmm cu. ( ywy ) cable ( for power supply to oltc / rtcc ) 46 12c x 1.5 sqmm cu. ( ywy ) cable ( for vcb to tr marshalling box and rtcc to oltc ) 47 1.1kv aluminium conductor power cables ( in trench ) supply, handling, shifting, laying, testing and commissioning of the aluminium conductorxlpe insulated, pvc sheathed, armoured and served cable 1100v grade as per is : 7098 ( part 1 ) 1988 and is 1554 ( part 1 ) to be laid in existing trench / pipe of required size etc., as per pwd general specifications : 48 3.5c x 400 sqmm a2xfy cable 49 2c x 2.5 sqmm cu. ( ywy ) cablefor power supply to marshalling box 50 4c x 2.5 sqmm cu. ( ywy ) cable ( for power supply to oltc ) 51 12c x 1.5 sqmm cu. ( ywy ) cable ( for vcb to tr marshalling box and rtcc to oltc ) 52 al. conductor cable end termination supply & erection of heavy duty double compression gland for end termination of xlpe insulated, pvc sheathed, frls cable, duly complete with check nuts, al. lugs ring / pin / bottle type etc. including making necessary connections. complete in all respectas required : 53 3.5c x 400 sqmm a2xfy cable ( 82mm ) 54 cu conductor cable end termination supply & erection of heavy duty double compression gland / ph pvc glands for end termination of xlpe insulated, pvc sheathed cable, duly complete with check nuts, cu. lugs ring / pin / bottletype etc. including making necessary connections. complete in all respectas required : 55 2c x 2.5 sqmm cu.2xwy cable ( 19mm ) 56 4c x 4.0 sqmm cu.2xwy cable ( 19mm ) 57 12c x 1.5 sqmm cu.2xwy cable ( 28mm ) 58 removing of directburried cableordinary soil removing of existing direct burried power / control cable at 0.75mtrsdepth in ordinary soil of size 8r x 3.5c x 300sqmm.excavation has been considered in excavation item no. 5.01. the cables shall rolled & tied properly and stored in store as per direction of the engineer in charge of the site. 59 section d_ lt panels:lt pane 60 section d_ lt panels: lt panels supply / receiving / handling / erection / testing & commissioning of cubicle type ( bolted & modular construction ) panels, fabricated out of 1.6 mm / 2mm ( all load bearing member& doors shall be 2mm andother parts shall be 1.6mm ) rust inhibited crca sheet steel, 7 tank treated sheets and powder coated shall be complete with incoming and out going feeders, electrolytic grade ( e91 ) aluminum bus bar, duly insulated with heat shrinkable pvc colour coded sleeves, shrouders ( shrouding shall be provided between top & bottom feeder ) , bus bar droppers, supported on dmc / smc insulators.panel construction shall be cpri approved and full proof protection from dust, water, humidity, fire, vibrations, temerature, variations, pull tension, noise, entry of rodent etc. ( as per relevant is standard ) , with heavy duty neoprene gaskets. the floor mounting panels shall be provided with mounting channels not less than 75mm x 75mm x 5mm thick of size. panels shall have aluminum earth bus through out the panel, the panel shall be provided with name / designation plate for all incoming / outgoing feeders, danger plate, door steel locks etc. the key should be common for all compartment / doors. the doors of compartment should not open when switch is in on position and provision of de interlock facility shall be provided. internal control / power wiring of the panel shall be carried out with lszh insulated copper conductors pvc insulated. all tests shall be carried out as per relevant is standard in presence of client or his representative and all tests certificates shall be submitted to the client in original duly signed by concerned authority. 61 general note for contractor 62 the rates for all these items under the following heads should include all necessary items and equipments as required. 63 assembling loose components of the various equipment as per manufacturers instructions or as per advise of engineer in charge 64 bonding onto masonry / concrete work including cutting / drilling holes through walls / floors and grouting with cementmortar 1:2:4 ( provide the finish level ) 65 providing all fixing accessories such as nuts, screws, bolts, anchor fastners etc. as required. 66 effecting adequate and proper connections to the main earthing stations ( as per is 3043 ) 67 touching up all damaged paint over equipment with same type shade and painting the ms angle , c channels etc. with two coats of red oxide & two coats offinishingapproved synthetic enamel paint. 68 all items listed in the boq shall be of approved make only as per tender. 69 any unspecified item shall be as per approval of consultant / architect / owner. 70 all digital meters shall have rs 485 port 71 all panels / cubicle shall be provided with sufficient number of space heaters ( 80 watts ) controlled by thermostate and mcb 72 all wires used in the panel shall be multistranded copper conductor lszh insulated, 1100v grade. 73 ct, pt & earth wires shall be 2.5sq.mm copper conductor, lszh, pvc insulated and control wiring not less than 1.5sqmm, lszh, pvc insulated, copper conductor shall be used.color coding shall be as per the is standard. power wiring shall be of suitable rating with lszh, pvc insulated, copper conductor multistrand. all wires used in the panel shall be lszh and class of pvc insulation shall withstand 105°c. 74 note : any item seems to be missing and needed for smooth running / functioning of the system shall be treated as included and no extra price will be paid for the same. 75 aluminium busbar shall be electrolytic grade e91. busbar shall be duly covered with heat shirankable pvc insulated coloured sleeve. neutral bus shall be equal to the phase bus. current density for aluminum bus shall be consider as 0.8a / sq.mm 76 acb make & model nos.: l&t model u power omega, fp, 50ka, m / p with mtx4.5 release, schneider mvs, fp, 50ka ( 6v release ) , siemens model 3wt ( etu 37wt release ) , fp, 50ka. abb ( emax ) fp, 50ka release pr 123, all acb shall be with terminal adaptor on both sides. dg feeder shall have external reverse power relay. 77 m / p based mccb make : all mccb`s with m / p based and having o / l, s / c & e / f protection l&t model d sine, schneider model cvs, siemens model 3va, abb model tmax. ics=icu=100% 78 tmd based mccb make : all mccb`s with tmd based and having o / l, s / c protection l&t model d sine, schneider model cvs, siemens model 3va, abb model tmax. ics=icu=100% 79 all settings of relay / releases of acb / mccb shall be set as per the requirement of the site and it will be in the scope of manufacturer through contractor. 80 the bus bar supports shall be on cast epoxy / resin / fiber glass insulator / dmc and sized as per cpwd specifications. the live parts of the panel shall be shrouded / covered by un breakable polycarbonate sheet with suitable warning stickers 81 all ct`s shall be cast resin type, for metering cl 0.5, burden 15va, & for protection cl 5p10, burden 15va, 82 contactor to submit the original test certifcate to owner from nabl or their authorized laboratory for all components / equipments / instrument tested at lab in presence of owner / or his representative and tta certificate from oem including photocopy of bills for switchgear / instument / equipment with all technical data / cat no. etc. 83 contactor to maintain the site neat & clean and all debris to be cleared from the site on completion of day work before leaving the site. 84 main lt panel 85 incomer transformer ( ptta ) 86 phase indicators led r y b with hrc fuse / mcb 01 set 87 neutral link 16a 01nos 88 16a fp mcb, 10ka, curve c for dg& rtcc supply 03nos 89 surge protection device 3p + n ( withdrable ) in confirmation with iec 61643 11 / 2011 t2 and en 61643 11 type 2 having inbuilt health indicator, response time <25ns, imax 8 / 20micro sec 70ka, operating voltage ( uc ) 340v, level of protection, up 1.0 2.0kv including25a, mccb, tpn, 36ka, adj. tmd 01set 90 40kvar, heavy duty, box type, 480v capacitor bank ( loss 0.2w / kvar ) with 100a, tpn mccb, 50ka, adj. tmd including roh, spreaderwith on / off led indicators including suitable ratings mcb, 10ka, curve c for control system 01set 91 3200a fp acb, edo, 50ka, with microprocessor based protectionwith o / l, s / c & e / f, ( lsing ) icu = ics = icw =100%, termination through copper tinned coated adaptor terminals on both side . ( i / c & o / g ) of breakers 01 nos 92 on, off, trip, sc & tch led indication with required rating nos mcb, 10ka, curve c, 01set 93 tnc switch 25amp. 01nos 94 electrical & mechanical interlocking accessories as required 01set 95 ctr 3200 / 5, burden 15va, class 1.0 for metering & apfc relay 06nos 96 digital multifunction meterhavingrs 485 port ( v, a, hz, pf, kwh, kva, thd, kvah ) having ass & vss provisions. class 1.0.ref. model l&t 4420 series or equivalent 01nos 97 2key + 2 castle lock 01set 98 incomer dg 99 phase indicators led r y b with hrc fuse / mcb 01 set 100 neutral link 16a 01nos 101 2000a fp acb, edo, 50ka, with microprocessor based protectionwith o / l, s / c & e / f, ( lsing ) icu = ics = icw =100%, termination through copper tinned coated adaptor terminals on both side . ( i / c & o / g ) of breakers 01 nos 102 on, off, trip, sc & tch led indication with required mcb etc. 01each 103 tnc switch 25amp. 01nos 104 electrical & mechanical interlocking accessories as required 01set 105 ctr 2000 / 5, burden 15va, class 1.0 for metering 03nos 106 digital multifunction meterhavingrs 485 port ( v, a, hz, pf, kwh, kva, thd, kvah ) having ass & vss provisions. class 1.0, ref. model l&t 4420 series or equivalent 01nos 107 8 window annunciator with accept, reset & test options and flashing window for all faults occurred. 01nos 108 reverse power protection relay 01nos 109 amf relay with all accessories for auto start / stop of dg set including all required indications ( dg running / fail to start, etc ) on the panel. also provision shall be provided for manual dg start / stop of dg set 01nos 110 20a battery charger having boost, float & trickle charge options with led indications & all needful protections including 0 30adc ammeter, 0 30volt dc voltmeter and suitable rating incoming / out going mcb 111 bus bar 112 aluminium busbar 3200 amp, tpn with colour coded sleeves, aluminium grade e 91, neutral bus shall be half of the phase and currenty density 0.8amp per sqmm. 113 out goings 114 2500a fp acb, edo, 50ka, with microprocessor based protectionwith o / l, s / c & e / f, ( lsing ) icu = ics = icw =100%, termination through copper tinned coated adaptor terminals on both side . ( i / c & o / g ) of breakers 01 nos 115 on, off, trip, sc & tch led indication with required mcb etc. 01each 116 tnc switch 25amp. 01nos 117 ctr 2500 / 5, burden 10va, class 1.0 for metering 03nos 118 digital multifunction meterhavingrs 485 port ( v, a, hz, pf, kwh, kva, thd, kvah ) having ass & vss provisions. class 1.0, ref. or l&t 4420 series or equivalent 01nos 119 1600a fp acb, edo, 50ka, with microprocessor based protectionwith o / l, s / c & e / f, ( lsing ) icu = ics = icw =100%, termination through copper tinned coated adaptor terminals on both side . ( i / c & o / g ) of breakers 02 nos 120 on, off, trip, sc & tch led indication with required mcb etc. 02each 121 tnc switch 25amp. 02nos 122 ctr 1600 / 5, burden 10va, class 1.0 for metering 06nos 123 digital multifunction meterhavingrs 485 port ( v, a, hz, pf, kwh, kva, thd, kvah ) having ass & vss provisions. class 1.0, ref. model l&t 4420 series or equivalent 02nos 124 1250amp. fp, mccb, o / l, s / c & e / f 50ka with microprocessor based release, ics = 100% icu, including in built neutral o / l protection, front led indication, extended rotary handle, spreaders, 3nos 1250a ct`s, cl 1.0, resin cast, digital multifunction meter ( vif ) having ass & vss provision ref model l&t 4110 or equal 01set 125 power monitering cubical 126 a cubicle to be provided in the panel of suitable size and terminate the2 x 1.0 sqmm copper shielded ( inner & outer ) cable from port 485 of each digital meter to the cubical designrd for purpose of power monitoring. the job involves wiring, termination on both ends duly ferruled as per requirements at site including 2.5sqmm terminals, din bar including 2 x 6a modular switch sockets multipurpose type & 2nos rj 45 io socket suitable for 10gb with cover plates etc. 127 all copper wire used shall be lszh 128 510kvar ( effective output kvar ) capacitor bank panel 129 incomer 130 phase indicators led r y b with hrc fuse / mcb 01 set 131 neutral link 16a 01nos 132 ctr 1250 / 5, burden 10va, class 1.0 for metering 03nos 133 digital multifunction meterhavingrs 485 port ( v, a, hz, pf, kwh, kva, thd, kvah ) having ass & vss provisions. class 1.0, ref. model l&t 4420 series or equivalent 01nos 134 capacitor banks 135 5kvar, 480volts, heavy duty, apptype double layer capacitor bank, ( loss 0.2w / kvar ) 01set 136 10kvar, 480volts, heavy duty, apptype double layer capacitor bank, ( loss 0.2w / kvar ) 01set 137 20kvar, 480volts, heavy duty, apptype double layer capacitor bank, ( loss 0.2w / kvar ) 01set 138 25kvar, 480volts, heavy duty, apptype double layer capacitor bank, ( loss 0.2w / kvar ) 03set 139 50kvar, 480volts, heavy duty, apptype double layer capacitor bank, ( loss 0.2w / kvar ) 08set 140 capacitor duty contactor 141 capacitor duty contactor suitable for 5.5kvar 01nos 142 capacitor duty contactor suitable for 12.5kvar 01nos 143 capacitor duty contactor suitable for 25kvar 01nos 144 capacitor duty contactor suitable for 33.1kvar 03nos 145 capacitor duty contactor suitable for 66.2kvar 08nos 146 misc. items 147 3 phase apfc relay mocroprocessor based 14 +2 steps ( ref. l&t model etacon or equal ) 01nos 148 on / off ledindicators red & green with push button suitable rating mcb and neutral link etc 14set 149 16a, auto / manual selector switch 14nos 150 on / off delay timer for manual operation of capacitor unit for providing discharge delay time 14nos 151 exhaust / cooling fans ( with standby fans ) for above of suitable rating ( control with thermostat ) asper required calculations 152 tp mccb 153 25amp. tp, mccb, 25ka with tmd, extended roh, spreaders and ics = 100% icu, 01set 154 40mp. tp, mccb, 25ka with tmd, extended roh, spreaders and ics = 100% icu, 01set 155 63amp. tp, mccb, 25ka with tmd, extended roh, spreaders and ics = 100% icu, 01set 156 80amp. tp, mccb, 25ka with tmd, extended roh, spreaders and ics = 100% icu, 03set 157 125amp. tp, mccb, 25ka with tmd, extended roh, spreaders and ics = 100% icu, 08set 158 all copper wire used shall be lszh 159 section e 160 section e _ cvil work: cleaning of existing cable trench cleaning of existing cable trench from all types filth material and make sure no material makes entry within the cable trench, the job involves sludge suction pumping machine, related tools & tackles etc. size approx 12m x 1m x 1m approx. compte in all respect as required. 161 excavation for trenchearth work in surface excavation upto 1.5mtrsdepth in ordinary soil including compaction & re filling of earth and removing of extra soil within distance of 100mtrs.the contractor to take all required pre cautions while working at site since job to be carried out in working sub station area. size / marking for excavation will be provided at the time of work. the work shall be carried out as per punjab govt. pwd specification. complete in all respect as required by the engineer in charge of site. 162 pre cast concrete ( pcc ) pre cast cement concrete in the ratio of 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate of 20 40mm nominal size ) . pcc thickness shall be minimum 100mm.size / marking for pcc will be provided at the time of work. the work shall be carried out as per punjab govt. pwd specification. complete in all respect as required by the engineer in charge of site. 163 brick masonary workbrick masonary work in ratio 1 : 5cement mortar with first class burnt bricks in foundation as per given design. the work shall be carried out as per punjab govt. pwd specification. complete in all respect as required by the engineer in charge of site. 164 plastering of wall providing and applying cement plaster in a ratio of 1 : 3 ( 1 cement : 3 coarse sand ) in cable trenches with curing etc. the work shall be carried out as per punjab govt. pwd specification. complete in all respect as required by the engineer in charge of site. 165 equal angle 75 x 6mmsupply, cutting, welding, grinding including welding set welding rod, cutter and all other tools required to fabricate out of the m.s. equal angle of size 75 x 6mm, as per given design for fixing on top of trench wall towards inner side including grouting arrangement ( baira ) . the equal angle top shall be in level with the finished floor. complete in all respect as required by the engineer in charge of the site. 166 chequer plate 6mm thickupply, cutting, welding, grinding including welding set welding rod, cutter and all other tools required to fabricate out of the m.s. chequer plate 6mm thick as per given design for fixing on top of open area of trench. the chequer plate shall have lifting arrangement. complete in all respect as required by the engineer in charge of the site. 167 coarse sandsupply & spreading of coarse sand for providing cushioning to direct burried cables 168 brickssupply & laying of first class bricks for covering / protection ( bricks shall be provided in the horizontal manner over the cable ) of direct burried cables 169 providing, laying and fixing 300mm dia rcc pipe np2 class ( heavy duty ) in ground complete with rcc collars, jointing with cement mortar 1 : 2 ( 1 cement : 2 fine sand ) at a depth of 75cm. ( excavation considered in itm no. 5.10 ) 170 excavation for trench in metaled roadearth work in surface excavation upto 1.5mtrsdepth in metaled road area including compaction & re filling of earth and removing of extra soil within distance of 100mtrs.the contractor to take all required pre cautions while working at site since job to be carried out in working sub station area. size / marking for excavation will be provided at the time of work. the work shall be carried out as per punjab govt. pwd specification. on completion of work contractor to made road as it was with help pre mix material. complete in all respect as required by the engineer in charge of site....

Due Date : January 17, 2023

Tender Value : ₹ Ref. Documents

View Tender
2
Rail Coach Factory - Punjab

34415831 supply of axle mounted disc brakeaxle mounted disc brake, axle mounted disc brake system for slr coaches ( brake calliper ratio for slr = 2.48 ) , as per drawing: rdso / 2011 / cg 04 rev.01 ( without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve ) and dy.cme / d2s letter no. md46131 dated 11 / 06 / 2015, packing instruction: packing as per standard packing => limited...

Due Date : October 21, 2022

Tender Value : ₹ Ref. Documents

View Tender
3
Rail Coach Factory - Punjab

34358228 supply of supply, installation & commissioning of amdbs for various types of lhb coachessupply, installation & commissioning of amdbs for various types of lhb coaches, supply of axle mounted disc brake system for ac & nac coaches as per drawing / spec. no. : rdso / 2011 / cg 04 rev.01 with amendment 1 ( without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve ) and dy.cme / d2s letter no. md46131 dt. 11 / 06 / 2015, packing instruction : packing as per standard packing , supply of axle mounted disc brake system for ac & nac coaches as per drawing / spec. no. : rdso / 2011 / cg 04 rev.01 with amendment 1 ( without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve ) and dy.cme / d2s letter no. md46131 dt. 11 / 06 / 2015. packing instruction : packing as per standard packing , installation & commissioning of axle mounted disc brake system for ac & nac coaches, ( , supply of axle mounted disc brake system for slr coaches ( brake calliper ratio for slr = 2.48 ) as per drawing / spec. no. : rdso / 2011 / cg 04 rev.01 ( without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve ) and dy.cme / d2s letter no. md46131 dated 11 / 06 / 2015, packing instruction : packing as per standard packing , supply of axle mounted disc brake system for lhb slr coaches ( , installation & commissioning of axle mounted disc brake system for lhb slr coaches; ( , supply of axle mounted disc brake system for parcel van coaches ( caliper unit without hand brake with caliper ratio 2.48 and brake control panel without hand brake equipment same as in lhb ac / nac coaches ) , as per drawing / spec. no. : rdso / 2011 / cg 04 rev.01 with amendment 1 ( without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve ) and dy.cme / d2s letter no. md46131 dt. 11 / 06 / 2015 & dy.cme / d1s letter no. md46131 dt. 01 / 10 / 2019, packing instruction : packing as per standard packing , supply of axle mounted disc brake system for parcel van coaches, ( calliper unit without hand brake with calliper ratio 2.48 and brake control panel without hand brake equipment same as in lhb ac / non accoaches ) and ( , installation & commissioning of axle mounted disc brake system for parcel van coaches ( calliper unit without hand brake with calliper ratio 2.48 and brake control panel without hand brake equipment same as in lhb ac / non accoaches ) and ( ...

Due Date : November 10, 2022

Tender Value : ₹ Ref. Documents

View Tender
4
Rail Coach Factory - Punjab

34278261 supply of axle mounted disc brake system with wsp for double decker coachaxle mounted disc brake system with wsp for double decker coach, axle mounted disc brake system with wsp for double decker coach as per drawing / spec. no. : rdso / 2011 / cg 04 ( rev 1 with amendment 1 ) ( without brake disc and emergency brake cable box npz 1 s or passanger emergency pilot valve ) and dy.cme / d2s letter no. md46131 dtd. 11 / 06 / 2015., packing instruction : packing as per standard packing => limited...

Due Date : October 14, 2022

Tender Value : ₹ Ref. Documents

View Tender
5
Department Of Defence - Punjab

33596035 bids are invited for 8 port switch , nvr , bullet camera 4mp , hard disk , cable , box , rack , hdmi , installation , domecamera 2mp , camera total quantity : 481...

Due Date : August 24, 2022

Tender Value : ₹ Ref. Documents

View Tender
6
Department of Higher Education - Punjab

33534951 bids are invited for poe switch 24 port with in power cord , non poe switch 48 port with in power cord , wi fi controller , indoor access point 2x2 , indoor access point 3x3 , cat 6 utp patch cord 1 meter , cat 6 utp cable box 305 meter , sfp 10gcompatible , cassing caping , installation mountingconfiguration documentation of switches and acesspoints ,laying of utp or pvc pipe or duct total quantity : 318...

Due Date : August 26, 2022

Tender Value : ₹ 20 Lakhs

View Tender
7
Punjab State Transmission Corporation Limited - Punjab

30803721 tender for erection of 11 kv panels upto 5 nos, shifting of breakers to the site of erection, leveling and connect the bus bar. making cable joint, mounting, cable box with t/f and 11 kv incommer pannel....

Due Date : February 06, 2022

Tender Value : ₹ Ref. Documents

View Tender
8
Rail Coach Factory - Punjab

30321418 supply of axle mounted disc brake system for power car cocahesaxle mounted disc brake system for power car cocahes,axle mounted disc brake system for power car cocahes, as per drawing: rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dt. 11/06/2015, packing instruction: packing as per standard packing...

Due Date : January 12, 2022

Tender Value : ₹ Ref. Documents

View Tender
9
Rail Coach Factory - Punjab

30293556 supply of installation and commissioning of axle mounted disc brake system and emergency brake cable box in lhb coaches...

Due Date : January 06, 2022

Tender Value : ₹ 94.66 Lakhs

View Tender
11
Rail Coach Factory - Punjab

29298602 supply of supply, installation & commissioning of items for various types of lhb coachessupply, installation & commissioning of items for various types of lhb coaches,supply of item axle mounted disc brake system for ac & nac coaches, as perdrawing/spec. no. : rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc andemergency brake cable box npz 1 s or passenger emergency pilot valve) anddy.cme/d2s letter no. md46131 dt. 11/06/2015, packing instruction: packing as per standardpacking , supply of item axle mounted disc brake system for ac & nac coaches as perdrawing/spec. no. : rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc andemergency brake cable box npz 1 s or passenger emergency pilot valve) anddy.cme/d2s letter no. md46131 dt. 11/06/2015., packing instruction: packing as per standardpackingpage 1 of 8 run date/time: 22/09/2021 16:13:24stores/tkj/rcftender document , installation & commissioning of item axle mounted disc brake system forac & nac coaches , supply of item axle mounted disc brake system for slr coaches (brakecalliper ratio for slr = 2.48), as per drawing/spec. no. : rdso/2011/cg 04 rev.01 (withoutbrake disc and emergency brake cable box npz 1 s or passenger emergency pilotvalve) and dy.cme/d2s letter no. md46131 dated 11/06/2015, packing instruction: packing asper standard packing. , supply of item axle mounted disc brake system for lhb slr coaches(brake calliper ratio for slr = 2.48), as per drawing/spec. no. : rdso/2011/cg 04 rev.01(without brake disc and emergency brake cable box npz 1 s or passengeremergency pilot valve) and dy.cme/d2s letter no. md46131 dated 11/06/2015, packinginstruction: packing as per standard packing. , installation & commissioning of item axle mounted disc brake system forlhb slr coaches (brake calliper ratio for slr = 2.48), , supply of item axle mounted disc brake system for parcel van coaches :(caliper unit without hand brake with caliper ratio 2.48 and brake control panelwithout hand brake equipment same as in lhb ac/nac coaches), as per drawing/spec. no. :rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brake cablebox npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131dt. 11/06/2015 & dy.cme/d1s letter no. md46131 dt. 01/10/2019, packing instruction: packing asper standard packing.page 2 of 8 run date/time: 22/09/2021 16:13:24stores/tkj/rcftender document , supply of item axle mounted disc brake system for parcel van coaches ;(calliper unit without hand brake with calliper ratio 2.48 and brake control panelwithout hand brake equipment same as in lhb ac/ non ac coaches) as per drawing/spec. no.: rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brakecable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no.md46131 dt. 11/06/2015 & dy.cme/d1s letter no. md46131 dt. 01/10/2019, packing instruction:packing as per standard packing. , installation & commissioning of item axle mounted disc brake system forparcel van coaches : (calliper unit without hand brake with calliper ratio 2.48 andbrake control panel without hand brake equipment same as in lhb ac/non accoaches) and ( , supply of item axle mounted disc brake system for lhb ra coaches (brakecalliper ratio for ra = 2.17) as per drawing/spec. no. : rdso/2011/cg 04 rev.01 (without brakedisc and emergency brake cable box npz 1 s or passenger emergency pilot valve)and dy.cme/d2s letter no. md46131 dated 11/06/2015, packing instruction : packing as perstandard packing....

Due Date : October 18, 2021

Tender Value : ₹ Ref. Documents

View Tender
12
MINISTRY OF HUMAN RESOURCE DEVELOPMENT - Punjab

28987676 bids are invited for boq total quantity : 1 cctv surveillance at iim amritsar hostel ( blessing city ) 1 poe switch 8 ports 3 nos 2 rack 9u 500mm with accessories ( including cable manager=1, pdu 5 socket 5 amp=1, mounting hardware ( set of 10 cage nuts ) =3 & top mounted fan=2 2 nos 3 patch panel unloaded 2 nos 4 i / o jack for pp 12 nos 5 5 mp ip camera ( pole mounted ) 12 nos 6 camera enclosure box 12 nos 7 16 channel nvr with 4k support and 2 hdd slot 1 nos 8 keyboard and mouse kit 1 nos 9 hdmi cable 4k 5 meter 1 nos 10 6 tb hdd 1 nos 11 cat6 utp cable box ( 305 meter ) 2 box 12 cat6 utp patch cord 1 meter 12 nos 13 rj 45 connector 1 box of 100 1 box 14 pvc duct 30 / 25 130 meter 15 1.5” pvc flexible 20 meter 16 hdpe pipe...

Due Date : September 04, 2021

Tender Value : ₹ 8.60 Lakhs

View Tender
13
Rail Coach Factory - Punjab

28012282 supply of axle mounted disc brake system for lhb ra coachesaxle mounted disc brake system for lhb ra coaches, axle mounted disc brake system for lhb ra coaches ( brake calliper ratio for ra = 2.17 ) , as per drawing : rdso / 2011 / cg 04 rev.01 ( without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve ) and dy.cme / d2s letter no. md46131 dated 11 / 06 / 2015, packing instruction: packing as per standard packing...

Due Date : June 09, 2021

Tender Value : ₹ Ref. Documents

View Tender
14
Rail Coach Factory - Punjab

27242188 supply of axle mounted disc brake system for various types of lhb coachessupply of item axle mounted disc brake system for ac & nac coaches as perdrawing/spec no. : rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc andemergency brake cable box npz 1 s or passenger emergency pilot valve) anddy.cme/d2s letter no. md46131 dt. 11/06/2015., packing instruction: packing as per standardpacking , installation and commisioning of item axle mounted disc brake systemfor ac & nac coaches ( , supply of item axle mounted disc brake system for parcel van coaches(caliper unit without hand brake with caliper ratio 2.48 and brake control panelwithout hand brake equipment same as in lhb ac/ non ac coaches) as per drawing/spec. no.: rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brakecable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no.md46131 dtd. 11/06/2015 & dy.cme/d1s letter no. md46131 dtd. 01/10/2019, packing instruction:packing as per standard packing , installation & commissioning of item axle mounted disc brake system forparcel van coaches (caliper unit without hand brake with caliper ratio 2.48 andbrake control panel without hand brake equipment same as in lhb ac/ non accoaches) and ( , supply of axle mounted disc brake system for parcel van coaches(caliper unit without hand brake with caliper ratio 2.48 and brake control panelwithout hand brake equipment same as in lhb ac/nac coaches), as per drawing/spec. no. :rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brake cablebox npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131dtd. 11/06/2015 & dy.cme/d1s letter no. md46131 dtd. 01/10/2019, packing instruction: packing asper standard packing...

Due Date : March 31, 2021

Tender Value : ₹ Ref. Documents

View Tender
15
Rail Coach Factory - Punjab

25277350 supply of axle mounted disc brake system for various types of lhb coaches, axle mounted disc brake system for ac & nac coaches, as per drawing: rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dt. 11/06/2015, packing instruction: packing as per standard packing, axle mounted disc brake system for slr/ra coaches, as per drawing: rdso/2011/cg 04 rev.01 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dated 11/06/2015, packing instruction: packing as per standard packing, axle mounted disc brake system for parcel van coaches ; (caliper unit without hand brake with caliper ratio 2.48 and brake control panel without hand brake equipment same as in lhb ac/nac coaches), as per drawing: rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dt. 11/06/2015 & dy.cme/d1s letter no. md46131 dt. 01/10/2019, packing instruction: packing as per standard packing, supply of axle mounted disc brake system for alstom lhb design ac & nac coaches as per drawing: rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dt. 11/06/2015, packing instruction: packing as per standard packing, installation and commissioning of axle mounted disc brake system for alstom lhb design ac & nac coaches (scope of work as per doc. no. ab 02/abs ver. 0.0 dt.22/04/19. as per drawing: rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dt. 11/06/2015,...

Due Date : September 28, 2020

Tender Value : ₹ Ref. Documents

View Tender
16
Rail Coach Factory - Punjab

24727733 supply of axle mounted disc brake system for alstom lhb design parcel van coaches, axle mounted disc brake system for alstom lhb design parcel van coaches (caliper unit without hand brake with caliper ratio 2.48 and brake control panel without hand brake equipment same as in lhb ac/nac coaches), as per drawing: rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dt. 11/06/2015 & dy.cme/d1s letter no. md46131 dt. 01/10/2019, packing instruction: packing as per standard packing, supply of axle mounted disc brake system for alstom lhb design parcel van coaches (calliper unit without hand brake with calliper ratio 2.48 and brake control panel without hand brake equipment same as in lhb ac/ non ac coaches) and (scope of work as per doc. no. ab 02/ abs 01 ver.0.0 dt. 29.01.2020)., as per drawing: rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dt. 11/06/2015 & dy.cme/d1s letter no. md46131 dt. 01/10/2019, packing instruction: packing as per standard packing, installation and commissioning of axle mounted disc brake system for alstom lhb design parcel van coaches (calliper unit without hand brake with calliper ratio 2.48 and brake control panel without hand brake equipment same as in lhb ac/ non ac coaches) and (scope of work as per doc. no. ab 02/ abs 01 ver.0.0 dt. 29.01.2020)., as per drawing: rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dt. 11/06/2015 & dy.cme/d1s letter no. md46131 dt. 01/10/2019, packing instruction: packing as per standard packing...

Due Date : July 06, 2020

Tender Value : ₹ Ref. Documents

View Tender
17
Rail Coach Factory - Punjab

24492261 supply of supply, installation & commissioning of axle mounted disc brake system for lhb design slr/ra coaches, supply of axle mounted disc brake system for alstom lhb design slr/ra coaches.as per drawing/spec. rdso/2011/cg 04 rev.01 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dated 11/06/2015, installation & commissioning of axle mounted disc brake system for alstom lhb design slr/ra coaches.(scope of work as per doc. no. ab 06/abs ver. 0.0 . rate of installation & commissioning are to be quoted separately) as per drawing/spec. rdso/2011/cg 04 rev.01 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dated 11/06/2015...

Due Date : June 19, 2020

Tender Value : ₹ Ref. Documents

View Tender
18
Rail Coach Factory - Punjab

24426389 supply of axle mounted disc brake system for alstom lhb design parcel van coaches, axle mounted disc brake system for alstom lhb design parcel van coaches (caliper unit without hand brake with caliper ratio 2.48 and brake control panel without hand brake equipment same as in lhb ac/nac coaches), as per drawing: rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dt. 11/06/2015 & dy.cme/d1s letter no. md46131 dt. 01/10/2019, packing instruction: packing as per standard packing, installation & commissioning of axle mounted disc brake system for alstom lhb design parcel van coaches (calliper unit without hand brake with calliper ratio 2.48 and brake control panel without hand brake equipment same as in lhb ac/ non ac coaches) and (scope of work as per doc. no. ab 02/ abs 01 ver.0.0 dt. 29.01.2020)., as per drawing: rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dt. 11/06/2015 & dy.cme/d1s letter no. md46131 dt. 01/10/2019, packing instruction: packing as per standard packing...

Due Date : June 29, 2020

Tender Value : ₹ Ref. Documents

View Tender
19
Rail Coach Factory - Punjab

23721696 supply of supply of axle mounted disc brake system for alstom lhb group 1, supply of axle mounted disc brake system for alstom lhb design parcel van coaches ( calliper unit without hand brake with calliper ratio 2.48 and brake control panel without hand brake equipment same as in lhb ac / non ac coaches ) as per drawing / spec. rdso / 2011 / cg 04 rev.01 with amendment 1 ( without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve ) and dy.cme / d2s letter no. md46131 dt. 11 / 06 / 2015 & dy.cme / d1s letter no. md46131 dt. 01 / 10 / 2019, installation & commissioning of axle mounted disc brake system for alstom lhb design parcel van coaches ( caliper unit without hand brake with caliper ratio 2.48 and brake control panel without hand brake equipment same as in lhb ac / non ac coaches ) and scope of work as per doc. no. ab 02 / abs 01 ver.0.0 dt. 29.01.2020 as per drawing / spec. rdso / 2011 / cg 04 rev.01 with amendment 1 ( without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve ) and dy.cme / d2s letter no. md46131 dt. 11 / 06 / 2015 & dy.cme / d1s letter no. md46131 dt. 01 / 10 / 2019...

Due Date : February 26, 2020

Tender Value : ₹ Ref. Documents

View Tender
20
Rail Coach Factory - Punjab

23721491 supply of group 1, supply of axle mounted disc brake system for alstom lhb design parcel van coaches (calliper unit without hand brake with calliper ratio 2.48 and brake control panel without hand brake equipment same as in lhb ac/ non ac coaches) as per drawing/spec. rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dt. 11/06/2015 & dy.cme/d1s letter no. md46131 dt. 01/10/2019, installation & commissioning of axle mounted disc brake system for alstom lhb design parcel van coaches (caliper unit without hand brake with caliper ratio 2.48 and brake control panel without hand brake equipment same as in lhb ac/ non ac coaches) and scope of work as per doc. no. ab 02/abs 01 ver.0.0 dt. 29.01.2020 as per drawing/spec. rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dt. 11/06/2015 & dy.cme/d1s letter no. md46131 dt. 01/10/2019...

Due Date : February 26, 2020

Tender Value : ₹ Ref. Documents

View Tender
21
Military Engineer Services - Punjab

23043286 repair of external electrification & connected items incl necessary networking & redesigning existing unbalalnce load distribution system, test equipment at af stn barnala under ge ( af ) halwara dismantling of old u / s relay & supply, installation, testing and commissioning of automaticmultifunctional real time power analyser with micro programmer scrolling dispaly device to record each electrical parameter as per site connected with 3 phase external ct operated with three phase supply voltage ( 300 480 ) volts unit ( 45 hz 55 hz ) etc as required to shut down the exsisting switching mccb ( make: partner cat no piacos / l&t / abb ) u / s current transformer of any type of ratio and replacement with new supply, installation, testing and commissioning of 3 phase metering , protection ct inside the existing low tension switchgear / breaker / swicting contactors must saturate sufficiently high to allow a relatively accurate measurement of the fault current by the protection whose operating threshold can be very high. with built in high accuracy limit factor ( alf ) ratio between the nominal overcurrent and the rated current. so that exsisting switchgear relay must be able to withstand high overcurrents also featured with real accuracy factor ratio between the overcurrent , nominal error and the rated current .with following specifications insulation level voltage 12 / 28 kv ratio 300 / 5 5 1 a core 1 5a for metering core 2 5 a for protection core 3 class ps, kpv >= 150 volts imag at vk / 2<= 30 ma , rct at 75c<= 2 ohms short time rating 15 ka for 1 second , make kappa / abb / schnider / rishabh / elmeasure n 2 dismantaling of old damaged burnt cable and bus bars and re arranging it proper by replacement with new ict suitable for 3 phase supply delta connected auto transformer which can step up & step down for synchronization electric sources of supply with bi directional command .also provided with sensor synchronised with the power supply for providing a circulating path for the zero sequence currents.with ratio 200 / 5 make kappa / abb / schnider / partner 3 disconnecting the electrical connection and painting to existing lt panel suitable for capacity up to 500 kva with two coats of red stove enameled paint, removing of old paint by scratching and applying one coat of red oxide before the paint complete all as directed by engr in charge & reconnecting all connections with new lugs , proper insulation and covering each cable box 4 dismentaling of old damaged burnt panel & , installation, testing and comissioning of weather and vermin proof indoor type lt panel factory made, front & back openable, double door type, fabricated out of 2 mm thick crca ( cold rolled closed annealed cell ) sheet compartmentalized design not less than 1.8m x 1.6m x 0.75m including mild steel channel frame of ismc 75 at the base of panel only for grouting purpose, and grouted in m 20 grade concrete using 20 mm graded stone aggregate, duly epoxy powder coated, complete with heat shrink insulated copper bus bar of 1200 amps rating 4 nos, including all connections with copper strips. pillar box shall be provided with danger notice plate with skull & bone sign, pvc gasket and sealed, making all incoming and out going electrical cable connection with new lugs, glands to be provided at cable entries, including angle iron support 50x50x6 mm with 50 cm height from ground level at the base of panel complete all as specified and as directed nincoming: ( a ) mccb, tpn 415 volts, 50hz, 800 amps, 36 ka, thermal magnetic release, ics =100% icu, front face isolataion with positive break indication with single break contacts with spreader and phase barrier 04 each n ( b ) multifunction meter as per site n ( e ) ct coils of suitable ratio 01 set. noutgoing: ( a ) lt miniature circuit breaker with new mccb 250 amps. 50 ka 4 pole, 415 volts, 50 hz for rated current at ambient temperature 50°c and conforming to is 13947 ( part 3, 1993 ) and iec : 60947 ( part 1 & 2 ) and other technical features as per ssr part i 19.100.13 with manual operated draw out type icu=ics ( 1 sec ) with microprocessor release 6l ( over load, short circuit, instantaneous and earth fault protection ) , pre trip alarm and individual fault indication led with fully rated neutral with inbuilt protection. the over load release shall be adjustable type. 5 dismantaling of old u / s and supply, installation, testing and commessioning of accurate power factor correction cum protection device 3 phase 4 wire 08 steps protection against power factor of the electrical system close to unity protection at power failure to close the capacitor bank and should not and due to sudden variation in the load the power factor shoots above unity auto shut down panel or switching off extra capacitors in delta mode factor condition. be re energized till it discharges to a safe value of 50 volts or less, relay should be instantaneous type with low voltage setting spikes / surge protection to trip the capacitor bank at overloading due to over voltage or harmonic current. over current relay tripping protection of the bank against system disturbances and faults protection of the bank against faults occurring within the bank including protection of the bank against faults occurring within the bank timer for re energisation after 5 minutes: protection to block the re switching of capacitor bank in less than 5 minutes. including with following specifications 3 phase 4 wire 3 current transformers resin cast 15 va burden 1100 volts insulation function limit the inrush current, improve the thd / pf at light load or high line, improved stability with a type 2 compensation network phase unbalance, auto phase reversal tripping suitable for exsisting apfc panels , phase missing under voltage and over voltage monitor and control, neutral open protection. also special zero crossing switching operation protection system digital display of line phase voltages and line current including frequency phase un balance ( 1 to 20% ) ( adjustable ) power consumption 15va / 3w setting accuracy voltage ± 4v, minimum setting current 0.5a, maximum setting currrent =5a ( above 5a external ct setting max.1000 / 5 in steps of 5 ) , setting accuracy current ± 5% of full scale ±1digit, trip time delay1 to 250secs settable for unbalance, overvoltage, undervoltage ( line to line & line to neutral ) , undercurrent & overcurrent, trip time accuracy± 1% of set delay ±2sec., trip setting, phase failure 3 sec max. factory set., phase reversal auto tripping, phase un balance1 to 20% ( adjustable ) , under voltage and over voltage 5v to 60v ac ( adjustable individually ) , recovery time2 sec min power on delay10 sec max., service life ( under no load ) 10lakh operations minimum , electrical life, ( under full load ) 10 lakh operations minimum protection system should be provided with each fault digital display, compensation of each phase, measure power factor , total watts, total var, total kwh, total kvarh, programmable thd protection, programmable discharge time make partner cat no piapfcpr / siemens / l&t / bch / abb 6 dismantling of old metering and replacement with new supply, installation, testing and commissioning digital display energy monitoring device without sms alerts with following specificification. completely installation using advanced, low cost, and reliable wireless communlcation technologies ( zigbee, & gprs ) . no rewiring costs, and easy to install with minimal time for commissioning.cloud hosted infrastructure: no need to host data servers, can be accessed by any internet enabled device including cell phones and tablets. minute to minute tracking of power consumption and costs involved ( as per electricity board tariff ) email alerts on critical situations sudden peaks, drop in pf, motor loading / under loading etc. compare and analyze past and current data over multiple time intervals ( daily, weekly, monthly ) tracking of power generation from grid, gensets and renewable, track roi on green infrastructure, and real cost of backup generation. tracking consumption pattern during peak hours, off peak hours and night hours as per electricity board guidelines. bench marking consuming devices against their knows production output comprehensive analytics, customized charting, automated reporting and a mis platform for the senior management team. n ( a ) modem specifications ( gprs / edge modem ) n ( a ) max power input: <1w. n ( b ) rf output power levels. n ( c ) max : 33dbm ( + / ) 2db. n ( d ) receiver sensitivity:<106dbm. n ( e ) avg power consumption ( sending data every 1 minute ) : <1w n ( f ) voltage range: 70v to 300v. n ( g ) normal operation temperature: 20 c to +55 c. n ( h ) bands: quad band. n ( i ) ports: rs485, rs232. n ( b ) ce certified gprs / edge modem. n ( a ) duel band gsm / gprs 900 / 1800 mhz ( b ) 3v3 & 5v interface for direct communication with mcu kit. n ( c ) configurable baud rate. n ( d ) sma connector with gsm antenna. n ( e ) sim card holder. n ( f ) built in network status led. n ( g ) inbuilt powerful tcp / ip protocol stack for internet data transfer over gprs. n ( h ) gprs mobile station class b. n ( i ) compliant to gsm phase 2 / 2+. n class 4 ( 2 w @ 900 mhz ) n class 1 ( 1w@ 1800mhz ) n n n n n n n 7 ( j ) control via at commands ( gsm07, 07, 07, 05 and simco menhanced at commands ) ( c ) micro controller ( a ) type msp430 5f4194. ( b ) hardware multiplier supporting 32 bit operations. n ( c ) seria on board programming no external programming voltage needed n ( d ) three channel internal dma. n ( e ) basic timer with real time clock feature. n ( f ) 12 bit analog to digital converter ( adc ) . n ( g ) up to four universal serial communication interfaces. n ( h ) unified clock system. n ( i ) flexible power management system. n ( j ) 16 bit risc architecture. n ( k ) wake up from standby mode in 3.5 us ( typical ) n ( l ) ultralow power consumption. n ( d ) spi flash. n ( a ) type winbond w25q16dv:16m bit / 2m byte ( 2, 097, 152 ) . n ( b ) programmable page 256 byte per page. n ( c ) type standard spi: clk / cs, di, do / wp / hold. n ( e ) specifications for data. n ( a ) gprs class 10: max, 85.6 kbps ( downlink ) . n ( b ) pbcch support. n ( c ) coding schemes cs 1, 2, 3, 4. n ( d ) csd upto 14.4 kbps. n ( e ) ussd. n ( f ) non transparent mode. n ( g ) ppp stack. n ( f ) interface. n ( a ) interface to external sim3v / 1.8v. n 8 ( b ) analog audio interface. n ( c ) rtc backup. n ( d ) spi interface ( option ) . n ( e ) serial interface. n ( f ) antenna pad. n ( g ) 12c. n ( h ) gpio. n ( i ) pwm. n ( j ) adc n ( g ) speecial firm ware. n ( a ) fota. n ( b ) mms. n ( c ) java ( cooperate with iasolution ) n ( d ) embeded at. n ( h ) frequency of meter reading is 1 minute. n ( j ) latency is 5 minutes, ( latency is the amount of time it takes to read data from meter and send it to server, it can be measured on onsite ) parameters reporting intervals: the web based application software and service graphical reports on following intervals:. n ( a ) 1 minute / 15 minutes / 30 minutes / hourly. n ( b ) hourly. n ( c ) daily. n ( d ) weekly n ( e ) monthly. n ( f ) yearly. n ( k ) location report. nthe user should be able to view the report of a single location well as a group of sub location over the specified period. he should be able to view the report in form of a graph, and tabular form. n ( l ) export reports in excel / csv format. n ( m ) online display of graphical charts for various electrical parameters. n 9 ( n ) define group of iemus meters based on locations. n ( o ) define the reports on cumulative kwh, and running hours, etc. n ( p ) define reports on the basic of quality of power supply like voltage imbalance, current imbalance, voltage fluctuations etc alarms and alerts: nthe web based application software and services should generate alarms and send alerts over sms messages to mobile users and emails for the conditions, such as. n ( q ) voltage in any phase goes above 260 volts with value of voltage. n ( r ) voltage in any phase goes below 180 volts with valve of voltage. n ( s ) power factor of any phase is less than 0.85 with value of power factor. n ( t ) any deviation from benchmark value of active power, apparent power and reactive power, 21.incoming power supply not available. n ( u ) ability to suppress the alerts during specified time period in a day. n ( v ) the system should be accessible anywhere through web but with a secured password protection and no software or hardware required to be installed for viewing the data on web. n ( w ) the software and server should be maintained by the firm, without cost implication, and there should not be any requirement of deploying it hardware and software. n ( x ) the web application shall be hosted on tier iii certified data center make partner caquivalent make as approved by ge minimum iso 9001:2015 certified. n 10 dismentaling of old damaged burnt fuse kit kat assembly and replace with supply instalation testing and commissioning of surge voltage arrester consisting of base element with remote indicator contact and ground connectors, for mounting on ns 35 / 7.5, nominal voltage: 230 v ac, 3 + 1 circuit protection with floating remote indication contact multi channel type 2 arresters optical, mechanical status indication for the individual arresters type 2 consistent plug in surge arresters mechanical coding of all slots disconnect device on each individual plug , ambient temperature ( operation ) 40 °c ... 80 °c ambient temperature ( storage / transport ) 40 °c ... 80 °c altitude = 2000 m ( amsl ( above mean sea level ) ) permissible humidity ( operation ) 5 % ... 95 % shock ( operation ) 25g ( half sine / 11 ms / 3x ±x, ±y, ±z ) vibration ( operation ) 5g ( 10 ... 500 hz / 2.5 h / x, y, z ) general iec test classification ii t2 en type t2 iec power supply system tn s tt mode of protection l n l pe n pe mounting type din rail: 35 mm color jet black ral 9005 housing material pa 6.6 pbt degree of pollution 2 flammability rating according to ul 94 v 0 type din rail module, two section, divisible number of positions 4 surge protection fault message optical, remote indicator contact protective circuit nominal voltage un 240 / 415 v ac ( tn s ) 240 / 415 v ac ( tt ) nominal frequency fn 50 hz ( 60 hz ) maximum continuous operating voltage uc ( l n ) 275 v ac maximum continuous operating voltage uc ( l pe ) 275 v ac maximum continuous voltage uc ( n pe ) 260 v ac rated load current il 80 a residual current ipe = 5 μa standby power consumption pc = 360 mva nominal discharge current in ( 8 / 20 ) μs 20 ka maximum discharge current imax ( 8 / 20 ) μs 40 ka current interrupt rating ifi ( n pe ) 100 a short circuit current rating isccr 25 ka voltage protection level up ( l n ) = 1.35 kv data protective circuit voltage protection level up ( l pe ) = 1.6 kv voltage protection level up ( n pe ) = 1.5 kv residual voltage ures ( l n ) = 1.35 kv ( at in ) = 1.1 kv ( at 10 ka ) = 1 kv ( at 5 ka ) = 0.9 kv ( at 3 ka ) residual voltage ures ( l pe ) = 1.6 kv ( at in ) = 1.2 kv ( at 10 ka ) = 1 kv ( at 5 ka ) = 0.9 kv ( at 3 ka ) residual voltage ures ( n pe ) = 0.4 kv ( at in ) = 0.25 kv ( at 10 ka ) = 0.15 kv ( at 5 ka ) = 0.1 kv ( at 3 ka ) tov behavior at ut ( l n ) 335 v ac ( 5 s / withstand mode ) 440 v ac ( 120 min / safe failure mode ) tov behavior at ut ( n pe ) 1200 v ac ( 200 ms / withstand mode ) response time ta ( l n ) = 25 ns response time ta ( l pe ) = 100 ns response time ta ( n pe ) = 100 ns max. backup fuse with v type through wiring 80 a ( gg ) max. backup fuse with branch wiring 125 a ( gg ) indicator / remote signaling switching function pdt contact operating voltage 5 v ac ... 250 v ac 30 v dc operating current 5 ma ac ... 750 ma ac 1 a dc connection method plug in / screw connection via combicon screw thread m2 tightening torque 0.25 nm stripping length 7 mm conductor cross section flexible 0.14 mm² ... 1.5 mm² conductor cross section solid 0.14 mm² ... 1.5 mm² conductor cross section awg 28 ... 16 connection data connection method screw connection. make citel / abb / schneider / phonix n...

Due Date : January 25, 2020

Tender Value : ₹ 35 Lakhs

View Tender
22
Rail Coach Factory - Punjab

22895892 supply of axle mounted disc brake system for alstom lhb design parcel van coaches, axle mounted disc brake system for alstom lhb design parcel van coaches (caliper unit without hand brake with caliper ratio 2.48 and brake control panel without hand brake equipment same as in lhb ac/nac coaches)as per drawing/spec. rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dt. 11/06/2015 & dy.cme/d1s letter no. md46131 dt. 01/10/2019...

Due Date : December 20, 2019

Tender Value : ₹ Ref. Documents

View Tender
23
Rail Coach Factory - Punjab

22774507 supply of supply and apply of emergency brake cable box npz 1 s, supply of emergency brake cable box npz 1 s ( passanger emergency pilot valve and covering ) as per drawing / spec. supply of emergency brake cable box npz 1 s to knorr bremses drg.no. 2c59637 & part no. ii 18996 and covering to drg. no lh36102 alt c or sab wabcos ( m / s faiveley ) drg.no. 02 525 0947 & part no. 525 0012 00 and covering to drg. no le36126 alt c and fixing as per doc.no ab 02 / peas ver.00 22.04.19., apply of emergency brake cable box npz 1 s ( passanger emergency pilot valve and covering ) as per drawing / spec. supply of emergency brake cable box npz 1 s to knorr bremses drg.no. 2c59637 & part no. ii 18996 and covering to drg. no lh36102 alt c or sab wabcos ( m / s faiveley ) drg.no. 02 525 0947 & part no. 525 0012 00 and covering to drg. no le36126 alt c and fixing as per doc.no ab 02 / peas ver.00 22.04.19....

Due Date : December 27, 2019

Tender Value : ₹ Ref. Documents

View Tender
24
Rail Coach Factory - Punjab

22732370 supply of supply and apply of emergency brake cable box npz 1 s, supply of emergency brake cable box npz 1 s ( passanger emergency pilot valve and covering ) as per drawing / spec. supply of emergency brake cable box npz 1 s to knorr bremses drg.no. 2c59637 & part no. ii 18996 and covering to drg. no lh36102 alt c or sab wabcos ( m / s faiveley ) drg.no. 02 525 0947 & part no. 525 0012 00 and covering to drg. no le36126 alt c and fixing as per doc.no ab 02 / peas ver.00 22.04.19., apply of emergency brake cable box npz 1 s ( passanger emergency pilot valve and covering ) as per drawing / spec. supply of emergency brake cable box npz 1 s to knorr bremses drg.no. 2c59637 & part no. ii 18996 and covering to drg. no lh36102 alt c or sab wabcos ( m / s faiveley ) drg.no. 02 525 0947 & part no. 525 0012 00 and covering to drg. no le36126 alt c and fixing as per doc.no ab 02 / peas ver.00 22.04.19....

Due Date : December 27, 2019

Tender Value : ₹ Ref. Documents

View Tender
25
Rail Coach Factory - Punjab

22667607 supply of axle mounted disc brake system for alstom lhb design parcel van coaches, axle mounted disc brake system for alstom lhb design parcel van coaches (caliper unit without hand brake with caliper ratio 2.48 and brake control panel without hand brake equipment same as in lhb ac/nac coaches)as per drawing/spec. rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve) and dy.cme/d2s letter no. md46131 dt. 11/06/2015 & dy.cme/d1s letter no. md46131 dt. 01/10/2019...

Due Date : December 04, 2019

Tender Value : ₹ Ref. Documents

View Tender
26
Punjab State Transmission Corporation Limited - Punjab

21409671 tender for regarding purchase of material for 2*361 mvar 111kv capacitor bank 11kv post insulator clamp, acsr condt. 48hh1m2, pg clamp 48 mm2, 11kv single core size 300 mm outdoor, 11 kv cable box single core size 300 mm indoor...

Due Date : August 28, 2019

Tender Value : ₹ Ref. Documents

View Tender
28
Rail Coach Factory - Punjab

19268182 tender for emergency brake cable box npz 1 s or passanger emergency pilot valve and coveringitem list : (1) emergency brake cable box npz 1 s or passanger emergency pilot valveand covering as per knorr bremses drg. no. 2c59637 & part no. ii 18996 and coveringto drg. no. lh36102 alt.c or sab wabcos (m/s. faiveley) drg. no. 02 525 0947 & part no. 5250012 00 and covering to drg. no le36126 alt.c...

Due Date : March 05, 2019

Tender Value : ₹ Ref. Documents

View Tender
29
Rail Coach Factory - Punjab

18757166 tender for axle mounted disc brake system for alstom lhb design power car cocahesitem list : (1) axle mounted disc brake system for alstom lhb design power carcocahes as per rdso/2011/cg 04 rev.01 with amendment 1 (without brake disc andemergency brake cable box npz 1 s or passenger emergency pilot valve) anddy.cme/d2s letter no. md46131 dated 11/06/2015dy. punjab 82.00 set...

Due Date : January 28, 2019

Tender Value : ₹ Ref. Documents

View Tender
30
Indian Railway - Punjab

17715645 tender for axle mounted disc brake system for alstom lhb design power carcocahes as per rdso/2011/cg 04 rev.01 with amendment 01 (without brake disc andemergency brake cable box npz 1 s or passenger emergency pilot valve) anddy.cme/d2s letter no. md46131 dated 11/06/2015...

Due Date : October 25, 2018

Tender Value : ₹ Ref. Documents

View Tender
32
Diesel Locomotive Works - Punjab

16892436 tender for cable box with terminal pad assembly for auxiliary alternator. col i ofdrawing no. detc/us 7 1 015 alta....

Due Date : August 06, 2018

Tender Value : ₹ Ref. Documents

View Tender
33
Diesel Locomotive Works - Punjab

16796649 tender for cable box with terminal pad assembly for auxiliary alternator. col i ofdrawing no. detc/us 7 1 015 alta....

Due Date : July 27, 2018

Tender Value : ₹ Ref. Documents

View Tender
34
Rail Coach Factory - Punjab

16792976 tender for axle mounted disc brake system for alstom lhb design ldslr (lhb designsecond class cum luggage and brake van with compartment for pwds with underslung power pack 500kva) coaches.as per rdso/2011/cg 04 rev.01 (without brake discand emergency brake cable box npz 1 s or passenger emergency pilot valve ) anddy. cme/d2s letter no. md46131 dated 11/06/2015 & dy. cme/d1s letter no. md46131 dated08/11/2017...

Due Date : August 10, 2018

Tender Value : ₹ Ref. Documents

View Tender
35
Diesel Locomotive Works - Punjab

16783327 tender for cable box with terminal pad assembly for auxiliary alternator. col i ofdrawing no. detc/us 7 1 015 alta....

Due Date : July 27, 2018

Tender Value : ₹ Ref. Documents

View Tender
38
Rail Coach Factory - Punjab

13507658 supply of axle mounted disc brake system with wsp for lhb design double decker coachas per rdso/2011/cg 04 without brake disc and emergency brake cable box npz 1 s or passanger emergency pilot valve and dy.cme/d2s letter no. md46131 dt. 11/06/2015....

Due Date : October 04, 2017

Tender Value : ₹ Ref. Documents

View Tender
39
Rail Coach Factory - Punjab

13070929 supply of axle mounted disc brake system with steel brake disc ep assist system for alstom lhb design power car coaches for operation at 200 kmphas per mdts 23265 rev.01 without emergency brake cable box or passenger emergency pilot valvequantity:  13.00...

Due Date : August 30, 2017

Tender Value : ₹ Ref. Documents

View Tender
40
Rail Coach Factory - Punjab

13070928 supply of axle mounted disc brake system with steel brake disc ep assist system for alstom lhb design ac coaches for operation at 200 kmph.as per mdts 23265 rev.01 without emergency brake cable box or passenger emergency pilot valvequantity:  62.00...

Due Date : August 30, 2017

Tender Value : ₹ Ref. Documents

View Tender
41
Rail Coach Factory - Punjab

13069583 supply of emergency brake cable box npz 1 s or passanger emergency pilot valve and without coveringas per knorr bremses drg.no. 2c59637 part no. ii 18996 or sab wabcos m/s faiveley drg.no. 02 525 0947 part no. 525 0012 00....

Due Date : August 30, 2017

Tender Value : ₹ Ref. Documents

View Tender
44
Rail Coach Factory - Punjab

12325473 supply of axle mounted disc brake system for alstom lhb design power car cocahes for developmentas per rdso/2011/cg 04 rev.01 without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve and dy.cme/d2s letter no. md46131 dt. 11/06/2015quantity:  10.00...

Due Date : May 22, 2017

Tender Value : ₹ Ref. Documents

View Tender
45
Rail Coach Factory - Punjab

12325472 supply of axle mounted disc brake system for alstom lhb design ac nac coaches for developmentas per rdso/2011/cg 04 rev.01 without brake disc and emergency brake cable box npz 1 s or passenger emergency pilot valve and dy.cme/d2s letter no. md46131 dt. 11/06/2015quantity:  20.00...

Due Date : May 22, 2017

Tender Value : ₹ Ref. Documents

View Tender