supplying of sewer jetting machine 3000 ltrs capacity trailer mounted at stc bsf kharkan camp supplying of sewer jetting machine 3000 ltrs capacity trailer mounted at stc bsf kharkan camp , providing of sewer jetting machine of 3000 ltr capacity trailer mounted with following specification: general specification: , gvw of trailer : more than 9.0 kg or higher, wheel base : more than 2650.0 mm or higher, payload capacity of trailer : more than 3000.0 kg or higher, constructional parameters: capacity of split shaft pto (kgm): more than 280.0 kgm or higher, overall length : 4695.0 mm, overall width : 1880.0 mm, equipment length : 1490.0 mm, equipment height : 1260.0 mm, equipment rear over hang : no, if yes, declare equipment rear over hang: n/a, derrick arm available : yes, vacuum pump flow (cu m/hr) : more than 319.0 or higher, vacuum pump power : more than 167.0 hp or higher, suction hose internal diameter (as per is: 13946 latest) : 90.0 mm, suction hose length : more than 15.0 m or higher, working pressure range of jetting pump: 200.0 220.0 bar or higher, jetting hose inner diameter (capable of withstanding 1.5 times the maximum pressure generated by the pump : 22.0 mm, jetting hose length : 80.0 m, total tank capacity (sludge tank + water tank): 3000.0 8000.0 ltr or higher, thickness of tank plate (it shall be designed at a safety factor 4 times the operating pressure) as per is 13496 : more than 3.0 or higher, material of cover for engine, pump & hose reel compartment : ms sheet, performance parameters: warranty time : 24.0 48.0 month or higher, warranty distance : more than 12000.0 kmor higher, no of free service (with consumable) : 6, 7, 8 or higher, additional specification parameters tractor trailer mounted suction cum jetting machine is 13496, is: 8213, is: 11387 ( 1 pieces ), drive system: triplex plunger jetting unit driven by tractor through split shaft pto. split shaft unit is fitted b/w vehicles gear box & differential. jetting pump: (1) system triplex plunger pump (2) stroke 40 mm (3) delivery capacity 200 lpm (4) pressure 140 kg/cm2 (5) drive speed 1400 rpm (6) mounting on the front of the tank with the pump head facing outwards. (7) jetting hose thermoplastic (make polyhose or equivalent) (8) working pressure – 2800 psi, sludge tank: cylindrical tank fabricated with 5.0 mm thick ms plate (is 2062 grade a) and dish ends fabricated with 6.00 mm thick msplate conforming to is 2062 grade, the tank shall be provided with emptying rear cover at the rear, which shall be opened and closed on hinges, manually. the locking of the rear cover shall be effected by robust hand wheels, max operating 0.95 to 1.5 bar tank pressure. test pressure 1.5 bar, inner side of tank: inner side of tank to be painted with anti corrosive epoxy primer (two or more coat) of approved brand and manufacturer, tank level indication: provided on both fresh water compartment & operator side. training in basic operation & maintenance to be provided by the firm: minimum 03 days training to be provided...
Due Date : September 30, 2021
Tender Value : ₹ 8.50 Lakhs