time switch Tenders in Punjab

1
Punjab State Power Corporation Limited - Punjab

37675049 procurement of items under ea group for the year 2023 24 , icdp switch 32 amp with operatinghandle right side as per isi 10027/2000 make: anchor,c&s, siemens, l&t, ssk, havell, indoasian , ictp switch 32 amp confirming to is 10027/2000 make: anchor,c&s, siemens, l&t, ssk, havell,indoasian , ictp 63 amp. with operatinghandle right side conforming to is 10027/2000 make:anchor,c&s, siemens, l&t, ssk, havell, indoasian , ictp 100 amp. with operatinghandle right side conforming to is 10027/2000. make: anchor,c&s, siemens, l&t, ssk, havell,indoasian , 4 pole on load changeover switch 100amp in ss enclosure 415v 50hz as per is/iec:60947 1&3make anchor,c&s, siemens, l&t, ssk, havell,indoasian , 415v,50hz,4 pole 200amp. change over switch with fuse as per is 13703 & 13947make:anchor,c&s, siemens, l&t, ssk, havell,indoasian , 24hrs. time switch for auto control of street lightsas per is 13947 4 1. ( minimum time adjustment 15 mintues) make :c&s,siemens, l&t,ssk,havell , 24hrs. electronic time switch for auto control of street lightsas per latest is minimum time adjustment 15 mintues) make :c&s,siemens, l&t,ssk,havell , switches piano type 5 amp. is 3854/1997.make: anchor, havell, ssk , switch piano type, 15 amp. is 3854/1997. make: anchor,havell, ssk , two way switch 6amp. is 3854/1997. make: anchor,havell, ssk , fuse switch unit 63 amp 415 volt.fsh 63n with hrc fusewith operatinghandleright sideas per isi 13947/p iii 1993,with enclosure make: anchor,c&s, siemens, l&t, ssk, havell,indoasian , fuse switch unit 100 amp 415 volt.fsh 100n with hrc fusewith operatinghandleright sideas per isi 13947/p iii 1993,with enclosure make: anchor,c&s,siemens,l&t,ssk,havell,,indoasian , fuse switch unit with hrc fuse din typeof cap 250 amp.,415 v fshf 250 n typewith front operatinghandleas per isi 13947/p iii 1993makeanchor,c&s, siemens, l&t, ssk, havell,,indoasian , ceiling fan regulator (electronic type)conformingto is:11037/1984.make:anchor,havell,indoasian,ssk, , 3 pin socket f/t 6 amp conformingto is :1293 make: anchor,ssk,havell , porcelionkit –kat 63 amp, as per is 2036. , 3/6 pin socket f/t 15 amp conformingto is :1293 make: anchor, ssk,havell , 3 pin top shoe f/t 5 amp. conformingto is :1293 make: havell,ssk, anchor , 3 pin top shoe f/t 15amp. conformingto is :1293 make:havell , ssk,anchor , t/w board 7”x4”x2” , t/w board 4”x4”x2” , t/w board 9”x4”x2” , t/w board 8”x10”x2.5” , gang box plastic type size 6”x4”x4” or of suitable size fitted with one power plug and switch of 15 amp. 230v rating each. make:havell,anchor,ssk,indoasian , gang box plastic type size 6x4x4”or of suitable size fitted with oneplug and switch of 5 amp. 230v ratingeach. make: havell,anchor,ssk,indoasian , bakelite sheet ,white 3mm thick isi marked conforming to is : 2036 of size 4.5x 4.5 make: hylam gold, anchor, ssk or of reputed make , bakelite sheet ,white 3mm thick isi marked conforming to is : 2036 of size7.5x 4.5 make: hylam gold, anchor, ssk or of reputed make , bakelite sheet ,white 3mm thick isi marked conforming to is : 2036 of size 8.5 x 10.5 make: hylam gold, anchor, ssk or of reputed make , bakelite sheet ,white 3mm thick isi marked conforming to is : 2036 of size 10.5x12.5 make: hylam gold, anchor, ssk or of reputed make , mcb 16amp. 1 pole channel mounting having breakingcapacity10 ka.isi marked confirmingto iec:60947 2,is:13947 part ii make: c&s ,l&t, siemen,havell, indoasian , mcb 32a/240v/1pole channel mounting having breakingcapacity10 ka.isi marked confirmingto iec:60898 is:8828 part ii make : c&s ,l&t, siemen, havell,indoasian , mcb 32a/415v/ 3 pole channel mounting having breaking capacity 10ka isi marked confirming to iec 60947 2 part ii makec&s ,l&t, siemen, havell, indoasian , mcb6a/240v/1pole channel mounting having breaking capacity 10ka isi marked confirming to iec 60898 is:8828 60947 2 is:13947part iimakec&s ,l&t, siemen, havell , mcb 2pole 10amp 240v channel mounting confirming to iec 60947makec&s ,l&t, siemen, havell,indoasian , mcb mounting rail , mcb 32amp 2 pole 240/415vac channel mounted having breaking capacity 10ka as per iec 60947 2c&s ,l&t, siemen, havell,indoasian , mcb 32amp 2 pole upto 240vdc channel mounted having breaking capacity 10ka as per iec 60947 2 , mcb 3 pole,60/63amp 415v ac 50 hz ac channel mounted having breaking capacity 10ka confirming to iec60947 make :c&s, ,l&t,havel, siemens,indoasian , mcb 4 pole,63amp 415v ac 50 hz with mounting clamp confirming to iec60947 make :c&s, ,l&t,havel, siemens,indoasian , mcb 4 pole 60/63 amp. 415v with channel mounting clamp confirming to iec 60947. make : c&s,havell, siemens,l&t,indoasian , bell push buttons 5 amp. is:3854/ 1997. make: anchor, ssk havell , bell push button box type 5amp.230volt. make anchor, ssk, havel , pendent type push button station having 6 no. push buttonsin ip 65 degree of protection in light grey shade for crane and hoist application, in cast aluminium housing, having standard spring return push button with 1no + 1nc contact arrangementmakec&s ,l&t, siemen, havell,indoasian , mushroom head push button with metallic body 40mm dia latched (press to lock turn to realease) actuator with holder (rear connection) dia 22.5mm red colour with contact block 1no+ 1nc confirming to is 13947 5.makec&s ,l&t, siemen, havell,indoasia , push button30.5 mm dia with 2no+2nc contact block heavy duty type 600tcfp2 (050n2) as per is 13947 5 of colors red make bch,c&s,siemens,bch,l&t, , push button30.5 mm dia with 2no+2nc contact block heavy duty type 600tcfp2 (050n2) as per is 13947 5 of colors green make c&s,siemens,bch,l&t , push button30.5 mm dia with 2no+2nc contact block heavy duty type 600tcfp2 (050n2) as per is 13947 5 of colors yellow make c&s,siemens,bch,l&t , push button30.5 mm dia with 2no+2nc contact block heavy duty type 600tcfp2 (050n2) as per is 13947 5 of colors black make c&s,siemens,bch,l&t , push button set for 22.5mmdia cutout size consisting of luminous normal acutator flush type with plastic front ring and holder red, lamp holder with bult in resistor with indication lamp for 48vac/dc supply alongwith contact block 1no+1nc as per is 13947 5, make c&s ,l&t,abb,siemens , push button set for 22.5mmdia cutout size consisting of luminous normal acutator flush type with plastic front ring and holder green, lamp holder with bult in resistor with indication lamp for 48vac/dc supply alongwith contact block 1no+1nc as per is 13947 5, make c&s ,l&t,abb,siemens , heavy duty 30.5mm dia without adaptor plate push button actuator latchable (mushroom) releasing direction should be clockwise.(stp) with heavy duty contact element (1no+1nc) of rating 10 amp 500v ac suitable for 30.5mm actuator of (stp) with following facilities as per is 13947 5) to make 2no or 2nc at site. suitable for front or rear connection at site colours red make siemens/l&t/bch , shrouded spring return flush type, push button actuator of 30.5mm dia without adopter plate type tk 3,ss 91519 as per is 13947 5 along with 2no+2nc contact elements red colour makesiemens/l&t/bch/vaishno/fine/havell , shrouded spring return flush type, push button actuator of 30.5mm dia without adopter plate type tk 3,ss 91519 as per is 13947 5 along with 2no+2nc contact elementsgreen colour makesiemens/l&t/bch/vaishno/fine/havell , shrouded spring return flush type, push button actuator of 30.5mm dia without adopter plate type tk 3,ss 91519 as per is 13947 5 along with 2no+2nc contact elements yellowcolour makesiemens/l&t/bch/vaishno/fine/havell , selector actuator 30.5mm dia,3 position(1 0 1) tk 3(ss 91517)(1 0 2) c&s, l&t, siemens, bch make , multichip led lamp suitable for one to one replacement with filament type indication lamp with ba9s base cap operating voltage 24vdc color amber/white , multichip led lamp suitable for one to one replacement with filament type indication lamp with ba9s base cap operating voltage 48vdc color amber/white , electric buzzer 230v.make: havell,ssk, anchor , indicating lamp, filament type,pin type rating 24v ac/dc 2.0w,oal=26 27mm,metallic portion dia.9/10mm,length=12mm , indicating lamp, filament type,pin type rating 48v ac/dc 2.0w,oal=25mm,metallic portion dia.9/10mm,length=12mm , indicating lamp, filament type,screw type rating 28v dc 2.0w,oal=26mm,dia 12mm length 11mm no. of threads on metallic portion =4 , 63amp.,4 pole, 415volt on/off switchwith front operating handle suitable for mounting with screws in vertical orientation with following approx dimensions ( as seenfromfront handle )depth 70mm( excludinghandle)breadth 70mm, length =100mm confirming to is 13947 3( equipmentmodel –catno. –sk 95540 of l&t make )(fn 63 tpn)make l&t , 3pole on/off switch type ff63amp.,415volt (is13947 3) make: l&t havell, c&s, ssk,indoasian , pendent holder. 6 amp. 230v.isi marked conformingis:1258 1999.makeanchor, havell , ssk , ceiling rose 6amp. 230vas pper is 371/1999 make:anchor,havell,indoasian,ssk, , pvc casing caping double lock size 3/4 of 6ft length “make: poly lock ,pk,gp,gold, fine,havell or of reputed make , pvc casing caping double lock size 1”of 6ft length.make:poly lock , pk,gp,gold,fine,havell or of reputed make , pvc casing caping double lock1½”of 6ft length.make: poly lock ,pk,gp,gold, fine,havell or of reputed make , mcb plastic box suiitable for 2pole 6a/10a16a mcbmake: anchor,c&s, siemens, l&t, ssk, havell,indoasian , bakelite sheet white 3mm thick isi marked conforming to is : 2036 of size4x 2 make: hylam gold, anchor, ssk or of reputed make...

Due Date : June 16, 2023

Tender Value : ₹ Ref. Documents

View Tender
2
Ministry Of Defence - Punjab

36782911 bids are invited for hoes powrah as per is 1759 ( q3 ) , supply and fixing all weather in ground led light fitting 10watt weather waterproof warm white 3000k aluminium housing white powder coated , s and f sub main wiring along with pvc insulated unsheathed multi stranded 1100 volts grade copper conductor cable of size 2x1.5 sqmm , all as per item number 02 above but using 4x6 sqmm plus 2x6 sqm copper conductor cable. , supply and fixing time switch complete along with three phase conductor c power conductor ml 4 total quantity : 3304...

Due Date : March 24, 2023

Tender Value : ₹ Ref. Documents

View Tender
3
Military Engineer Services - Punjab

35302188 upgradation and extension of baffle range at nams ( tender id : 2022_mes_550653_2 ) surface dressing not exceeding 15 cm deep in soft / loose soil completeall as specified & directed. 3 earth work in excavation in all kind of soil by mechanical means ( hydraulic excavator ) over areas ( exceeding 30cm in depth, 1.50 metre in width as well as 10 sqm on plan ) including getting out and disposal of excavated earth lead upto 50 metre and lift upto 1.50 metre complete all as specified and directed. 4 all as per srl item no 1.02 above but depth exceeding 1.50 metre and not exceeding 3.00 metre. 5 earth work in excavation by mechanical means ( hydraulic excavator ) / in trenches or drains ( not exceeding 1.5 metre in width or 10 sqm on plan ) , not exceeding 1.5 metre deep including dressing of sides and ramming of bottoms, lift upto 1.5 metre, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metre complete all as specified and directed. 6 all as per srl item no 1.04above but depth exceeding 1.50 metre and not exceeding 3.00 metre. 7 excavating in trenches in soft / loose soil not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth for foundation for pipes, wells, cesspits, manholes, pier holes, cables etc not exceeding 10 sqm on plan and not exceeding 1.50 metre in depth and getting out complete all as specified and directed. 8 all as per srl item no 1.06above but depth exceeding 1.50 metre and not exceeding 3.00 metre. 9 surface excavation not exceeding 30 cm deep and averaging 15 cm deep, getting out in any type of soil complete all as specified and directed. 10 material and labour for approved earth filling in floors / trenches, laid in layers not exceeding 15cm thick spread, levelled and rammed / rolled including watering to required level & gradient complete all as specified and as directed. note : quoted rate shall deemed to be inclusive of supply of earth from outside defence land. 11 returning, filling in, spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each complete all as specified and directed. 12 material and labourfor cement concrete 1:4:8 type d 2 using 40mm gradedstone aggregate as in foundation filling anf mass concrete complete all as specified and directed. 13 material and labour for rcc ( m 25 ) design mixusing 20 mm graded stone aggregate as in foundation including rafts, footings and mass concrete etc complete all as specified andas directed. 14 material and labour for rcctype m 25 ( design mix ) using 20 mm graded stone aggregate in beam, lintels over 1.5m span height for staging upto 9.5m from gl complete all as specified andas directed. 15 material and labour for rcctype m 25 ( design mix ) using 20 mm graded stone aggregate in columns, pillars, posts height for staging upto 9.5m from gl etc complete all as specified andas directed. 16 use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces of concrete, flat, complete all as specified and directed. 17 use and waste of formwork to the sides of pillars, posts, piers, columns and stanchions, square or recatngular or polygonal, rough finished surface of concrete height for staging upto 9.5m from gl complete all as specified. 18 use and waste of form work to sides and soffits of floor or roof beam lintel beam, flat surfaces, support overhanged rough finished surface of concreteheight for staging upto 9.5m from gl complete all as specified and directed. 19 material and labour for mild steel tmtbars 10 mm dia and over, cut to length, ent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed 20 material and labourmild steel reinforcement tmtbars 5 mm dia and over up to and including 10 mm dia. in stirrups, spacers, binders etc.cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed. 21 m & l for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth not otherwise described for and priming with red oxide primer and applying two coat of synthetic enamel paint over priming coat all as specified and directed. 22 material and labour for rcc m 25 design mix, using 20 mm graded aggregates in walls, retaining walls, basement walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed. 23 material and labour 20mm thick cement plaster 1:4 mixed with recron fibre @ 180gm / bag of cement or as per manufacturer instruction s ( rough finish ) . note: recron fibre will be measured & paid for separately under relevant item here in after. 24 supply only recron fibre complete all as specified and directed. ( recron fibre shall be is marked & shall be approved by ge. 25 removal of excavated spoilto a distanceexceeding 500 metre but not exceeding 1.5 km and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed. 26 supply only 80mm thick bullet resistant fics panel ( slurry infiltrated fibre concrete ) of size 2.0 metre x 1.0 metre ( in three parts as shown on drgs ) ( 0.7m+0.6m+0.7m ) in lining on firing face of baffle wall all as per tbrl design and specifications and baffle range manual ( as amended up to date ) all as per shown in drg.note: ( i ) only tbrl certified makes panels shall be used in work. ( ii ) testing of panel shall all be carried out all as specified in particular specification section ii 27 fixing only of fics panels on baffle wall using 02 nos of hardwood battens of size 2000mmx100mmx35mm at the back of panel and using 06 nos of trutek or equivalent m 20 bolts and nuts of min 300mm length and 30 / 32mm dia / bore galvanised steel sleeve medium grade alongwith hardwood cap as per requirement at site complete all as specified and as shown on drgs. 28 fixing only of fics panels on baffle wall using 02 nos of hardwood battens of size 2000mmx100mmx35mm at the back of panel and using 06 nos of trutek or equivalent m 20 bolts and nuts of min 675mm lengthwith hardwood cap over the exposed faces of bolts of size 100x100mm in existing sleeve complete all as specified and directed by engr in charge. note for item no. 1.26 & 1.27: any other items required for fixing of fics panels shall also be deemed to be included in the quoted rates & nothing extra shall be admissible. 29 material and labour for 30mm thick cement palster 1:3 mixed with recron fibre @ 180gm / bag of cement or manufacturers instructions as specified ( rough finished ) . note: recron fibre shall be measured & paid for separately under relevant items here in before. 30 material & labour for reinforced cement concrete type m 25 design mix using 20 mm graded stone aggregatein stair case including steps complete all as specified andas directed. 31 use and waste of formwork to faces of walls, retaining walls, abutments, parapets & staircase railings and similar work including attached pilasters, buttresses etc vertical or to fair finished complete all as specified and as directed. 32 supply and fixing 2nd class hard wood boarding 30mm thick clean sawn with butt joints with nails is any situation ( except flooring and skirting ) complete all as specified and directed. 33 material and labour for cement plaster 15mm thick on fair faces or other than fair faces of brick work in cement mortar ( 1:4 ) finished even and smooth without using extra cement complete all as specified and as directed 34 material and labour for preparation of newly plastered surface on wall and applying two coats of apexpaint over a coat of alkali resistant primer at a height not exceeding 13m above or below gl in camouflaging pattern complete all as specified and directed. 35 material and labour 200 mm bore dia rcc pipes class np2 complete with collars laid in trenches and testing complete all as specified and directed 36 material and labour for plain cement concrete ( 1:3:6 ) type c 2 using 40mm graded stone aggregate as in bed of 200mm dia rcc pipes including forming cradles after they are laid & tested complete all as specified. 37 material and labour for preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified. 38 m&l for rcc ( m 25 ) design mix as using 20 mm as in slab supported on walls, beams and columns in floors, roofs, landings, balcony, canopy, deck slab and in shelves and the like complete all as specified andas directed. 39 use and waste of form work to sides and soffits of suspended slabs such as roof slab, landing and similar work complete all as specifed and directed. 40 use and waste of form work to edges of slabs such as roof slab, landing and similar work complete all as specifed and directed. 41 material and laying mild steel frame work as in manhole cover and in hold fast complete welded, hinged or pinned confirming o fe 290 gde e 165 complete all as specified. 42 material and labour for mild steel round deformedbars 16 mm dia and over, cut to length, ent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 09.mm dia or securing with clips complete all as specified and directed 43 material and labour for precast reinforced cement concrete 1:2:4 type b 1 using 20mm graded stone aggregate as in manhole cover and set in cement mortar 1:4 complete all as specified. 44 supply only composite trapezoidal boxes for ground barriers of size 1000mm x ( 700mm front& 650mm back ) x200mm thick all as per details shown on drawings. 45 all as per srl item no 1.43 above but of size 900mmx ( 700mm front and 650mm back ) x200mm thick complete all as per details shown on drawings. note for item no. 1.43 & 1.44: earth filling, stone aggregate & pcc 1:3:6 type c 2 shall be measured & paid for separately under relevant items. 46 material and labour for plain cement concrete 1:3:6 type c 2 using 40mm graded stone aggregate in foundation for fixing of ground barrier boxes complete all as specified. 47 supply and filling graded coarse aggregates of nominal size 10 20mm, for ground barrier boxes including filling all as direced by engr in charge. 48 demolition of cement concrete ( unreinforced ) in ground floors and paving not exceeding 15cm thick ( below or above ground level ) complete all as specified and directed. 49 material and labour for 75mm thick cement concrete 1:2:4 type b 1 using 20mm graded stone aggregate as in sub base of flooring finishing surfaces finished the surface even and smooth without using extra cement complete all as specified and directed. 50 material and labour brick work with fly ash bricks straight or curved on plan exceeding 6.00 mtr mean radius in cement mortar 1:4 including corbelling etc including demolition of old brick work complete all as specified and directed 51 taking down cement plaster from walls / ceilling including raking outjoints, hacking for key scrubbing down with water and dispose off debris upto distance not exceeding 500 m where directed complete all as specified and as directed. 52 supply and fixing ms wire mesh of size 40mmx40mm aperture hole with thickness 2 to 3mm and welding to existing reinforcement in wall / ceiling ( minimum 40 pieces in one sqm ) including necessary fixing arragement like scaffolding, welding machining etc complete all as specifed and as directed. 53 taking down bullet resistant sifcon panel of any thickness size and in any position on baffle wall etc complete all as directed. 54 dismantling off framed work timber scantling 40 sqcm and over in section & in any position completeall as specified. 55 dismantling of reinforced cement concrete of any description & in any position at any depth above or below gl completeall as specified and direced by engr in charge. 56 material and labour for plain cement concrete ( 1:2:4 ) type b 1 using 20mm graded stone aggregate cast in situ in lintels upto 1.5m span, cills and other similar bands, parapets, copings bed plates & like including weathering etc complete allas specified. 57 dismantling structural steel work including members by cutting rivets, removing nuts & bolts complete all as specified and as directed. 58 supply and fixing mild steel work as in framed work such as targets, grills, grating, framed guard bars etc with ends of bars shouldered or rivetted or forged into spikes and similar work conforming to fe 290 gde e 165 complete all as specified and as directed by engr in chrage. 59 supply and fixing in repairs 16mm dia hard drawn twisted steel wire rope fixed in any position including necessary cutting, notching and bolting arrangement complete all as specified and as directed. 60 supply and cast iron work grade fg 150 machined, in pulleys and similar article weight not execeeding 5 kg each complete all as specified. 61 supply and fixing 2nd class hard wood boarding 15mm thick clean sawn with butt joints with nails fixed over ms frame as targets in any situation ( except flooring and skirting ) complete all as specified and directed. 62 supply & fixingmild steel screw bolts ( machine made ) 11 to 15mm dia of shank with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc. 5 but not exc. 10 cm long, complete all as specified and as directed. 63 material and labour for 25mm thick cement concrete 1:2:4 type b 1 using 20 mm graded stone aggergate as in floors or steps and treads finishing cement concrete surface ever and smooth with using extra cement complete all as specified. 64 dismantling of heavy armoured plate of mild steel work of any description fixed with nuts & bolts over stop butt complete all as specified & as directed by engr in charge. 65 fixing only heavy armoured plate of any description with nuts & bolts over stop butt complete all as specified. note: nuts & bolts to be measured & paid separtely under item no 1.61 & 1.76. 66 material for labour 2nd class hard wood wrought in scantlings and fixed in repairs to replace old and decayed timber ( including piecing scarfing etc of old and new timbers if required ) in any shape & place complete all as specified and directed. 67 supply and fixing 25mm thick second class hard wood planks fixed over stop butt with nails, screws etc complete all as specified and as directed. 68 material & labour for earth filling under stop butt approved by ge, earth shall be free from vegetation, aggregate & shall be dry in powder form and filling in embankement complete all as directed by engr in charge.note : quoted rate shall deemed to be inclusive of supply of earth from outside defence land. 69 material & labour for roughening old concrete surfaces of wall / ceiling surfaces by picking, tucking with chiseling, sweeping clean and washing down with water to remove dust etc for baffle wall / side wall / stop butt complete all as specified and directed by engr in charge. 70 supply and fixing ms mesh of mesh of size 25mm and 1.4mm dia wire welding to existing reinforcement in wall / ceiling including necessary fixing arrangement like scaffolding welding machine etc complete all as specified and as directed. 71 material & labour washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 ( 1 cement : 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per sqm, top layer 15mm cement plaser 1:1 / 2:2 ( 1 cement:1 / 2 coarse sand: 2 stone chipping 10mm nominal size ) in panels withgroove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings complete all as specified. 72 material and labour for preparing old plastered surfaces of wall and applying one coat of apex paint at height not exceeding 10mtr from gl in camouflaging pattern over a coat of alkali resistant primer complete all as directed. 73 material and labour brick work with sub class b brick straight or curved on plan to any radius in half brick thick built in cm 1:4 complete all as specified and directed 74 material and labour brick work with sub class b brick straight or curved on plan exceeding 6m mean radiusbuilt in cm 1:6 complete all as specified and directed 75 material and labour for flush pointing to bricks walls in cement mortor 1:3 complete all as directed by engr in charage. 76 extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds stopped ends etc complete all as specified and directed. 77 supply and fixing mild screw botls ( machine made ) 16 to 20mm dia of shank with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc. 22.5 cm but n. exc 30 cm long, complete all as specified and as directed. 78 e / m works 79 material and laying for sub b bricks ( old size ) for cable protection laid flat and dry intrenches over the cable perpendicular to the direction of cable complete all as specified in ssr and directed by engr in charge. 80 mateiral & labour sand cushioning with dry and clean sand in two layers first layers of 80mm thick before laying of cables and second layer of 150mm after laying of cable complete all as specified and directed by engr in charge. note: punned down thickness shall be measured for payment. 81 supply and laying in replacement of lt underground cable xlpe insulated, inner pvc sheathed, galvanized steel strip armoured, pvc sheathed electric power cable with stranded compact aluminium conductor 1100 volts grade 35sqmm 3.5 core suitable for earthed system laid in duct / trench / along pole etc including making connection. note: the cost of aluminium timbles / lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it. 82 all as per srl item no. 2.03 here in after but of size 25 sqmm 4 core 83 all as per srl item no. 2.03 here in after but of size 10 sqmm 2 core 84 supply and fixing in replacement street light fitting bracketmade out of galvanised iron pipe 40mm bore light grade 1.5 mtr long complete with nuts, bolts, washer clamp etc all as specified and directed by engr in charge. 85 supply and fixing in replacement galvanized iron pipe of 50mm bore light grade fixed to poles / walls with nuts, bolts and washers or laid under road crossing complete all as specified and directed. 86 material and labour fabricating and fixing in replacement cross arms ( any type ) supports, bracing, stiffners etc made out of ms channel, angle iron, flat iron of any size including drilling of holes, making clamps, eye hooks, nuts, bolts and washers etc, welding if required including painting with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. 87 supply and fixing in replacement pin / disc type procelain vitreous white, brown or green insulator including one galvanized mild steel straps, washers and nuts for 1100 volts grade, including removal of existing insulators complete all as specified and directed. 88 material and labour in replacement for acsr conductor any size drawn straight horizontal lt over head lines on existing poles including binding with insulators, weight of conductor shall be measured straight horizontal distance between centre of two adjacent ht / lt poles and calculating weight of conductor or size length by adding 3% extra for sag, jointing jumpers etc complete all as specified and directed. 89 supply and fixing led street light fitting ip 66 pressure dia cast aluminium housing ( heat sink ) for effective thermal management, sturdiness excellent corrosion resistant ip operating voltage 140 270 volts, pf ( 0.95 ) , assemetric lens of leds, luminous flux>3800lm, efficacy of led>130 lm / w, of luminaires 60 watt led 5700k including fitting, lamp etc complete all as specified and directed. 90 supply and fixing in replacement lt feeder pillar box 440 volts 3 phase 4 wire 50 hz out door weather proof ip 56 ( cpri approved ) made out of 3mm thick crca sheet and angle iron frame made out of 50x50x6mm both side opening and suitable to fix cable glands locking arrangements powder coated and panel embarked in pcc block 30x30x60cm fixing in ground with suitable size of nut bolts and comprising of the following: ( a ) aluminium bus bar of capacity 200 amps 1 set of 4 ( ryb & black duly insulated ) ( b ) mccb 100 amps, 16 ka with adjustable thermal and fixed magnetic type ics 100% 01 no. ( c ) mcb tpn 63 amp, 10ka, 415v 02 nos ( d ) automatic quatrz time switch 3 phase 02 nos ( e ) digital amp meter of capacity 0 to 200 amp with selector switch=01 no ( f ) digital volt meter of capacity 0 to 500 volt 01 no. ( g ) led indicator lamp set of three. 91 supply and errecting prestressed concrete pole 9.0 mtrs long, 120x172mm at top and 102mm x 279mm at bottom class 10 complete with painting on poles all as specified and as directed by engr in charge. 92 material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick, buried directly in ground ( earth pit not less than 2.25 metres deep below ground level ) with top edge of the plate not less than 1.50 metres below normal ground level, earth plate surrounded from all sides by 15cm thick packed layers of charcoal dust and common salt filling in alternate layers alround, top & bottom and electrode connection by using galvanized iron earth strip 25x4mm connected to earth plate electrode by means of bolts, nuts check nuts and washers made of galvanized iron or steel and thimbles, gi pipe light grade 20mm bore for watering with funnel and wire mesh, gi medium grade 40mm bore protection pipe for drawing in earth lead wire, pcc chamber in pcc 1:2:4, type b 1 with angle iron 25x25x3mm frame work and pre cast rcc cover in rcc 1:2:4, type b 1, cover reinforced with 8mm dia tmt bars @100mm c / c both ways and 12mm dia ms fabricated handle, test point complete all as shown in electrical plate no 3 of mes standard schedule of rates ( part i ) including necessary excavation and earth work in any type of soil, returning filling and removal of soil to a distance not exc 50 metres and testing on completion complete all as specified and directed.notes ( a ) the unit rate shall include for gi protection pipe, gi watering pipe, wire mesh, funnel and excavation, rcc pit cover, test point, galvanised iron strip from top of earth plate upto 5.0 metres above ground level and if gi protection pipe is less than 5.0 metres, no price adjustment shall be made. ( b ) pccpit shall be provided at least 50cm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fittings, junction, elbow etc shall be deemed to be included in the unit rate. ( c ) if the testing result of earthingwork is not found satisfactory then the contractor shall do another earthing work at his own cost and nothing shall be permissible on this account. ( d ) earthing work will be carried out in presence of mes representative....

Due Date : January 09, 2023

Tender Value : ₹ 6.78 Crore

View Tender
4
Indian Army - Punjab

34266730 bids are invited for air release valve with 15mm bore clamp nut bolts packing etc suitable for 100mm dia pipe make nvr , aluminium beading not more than 20mm wide for fixing glass aluminium door , asbestos rubber packing 3 of 8 inches, thick suitable for valves joints etc , asbestos rope for exhaust pipe of dg set of size 9.525 mm thick make cummins, kirloskar, cg , astronimal digital time switch for street light control make legrand, havells, cg , battery lead 1 mtr long all as per sample suitable for 12 volt battery complete with terminal make exide, amron, smf , battery lead 2 mtr long all as per sample suitable for 12 volt battery complete with terminal make exide, amron, smf , bio meter for double door refrigerator , blower motor 1 by 10hp single phase 230 volt for water cooler make universal, aue, airmaster, khaitan, cg , blower motor 1 by 35hp single phase 230 volt for water cooler. make universal, aue, airmaster, khaitan, cg , blower motor 1 by 70 hp single phase 230 volt for water cooler. make universal, aue, airmaster, khaitan, cg , blower motor 4x4 single phase 230 volt for water cooler. make universal, aue, airmaster,khaitan,cg , blower motor for desert cooler 1 by 4 hp for water cooler make bajaj, cg, havels, khaitan , blower motor for desert cooler 1 by 8 hp for water cooler make bajaj, cg, havels, khaitan , brass jumper valve with pvc jumper washer 20mm as per sample pack of 100 each , brass spindle suitable for 100mm dia sluice valve complete with check nut etc. make minar, kirloskar, jainko , brass spindle suitable for 150mm dia sluice valve complete with check nut etc. make minar, kirloskar, jainko , brass spindle suitable for 200mm dia sluice valve complete with check nut etc. make minar, kirloskar, jainko , brass spindle suitable for 80mm dia sluice valve complete with check nut etc make minar, kirloskar, jainko , capacitor running for water cooler 10 oblique 15 oblique 20 mfd make havells,epcos, asian , capacitor running for de...

Due Date : October 10, 2022

Tender Value : ₹ 14 Lakhs

View Tender
5
Department Of Defence - Punjab

31732076 supply of electrical items 1 electric wire – flexible 23 / 76 2 electric wire – flexible 40 / 76 3 switch – 5a 4 switch –15a 5 plug top – 5a 6 plug top – 15a 7 socket 5a 8 socket 15a 9 electronic meter 5 20 a 10 cell pencil 11 led bulb – 09w, 12w and 20w 12 pvc tape 13 choke – 40 w 14 tube rod – 40 w 15 tube starter 16 tube side holder 17 multi plug 5a 18 multi plug 15a 19 condenser – 2.5a 20 condenser – 3.5a , 4mf 21 starter fly catcher 22 tube light fly catcher 23 cooler pads set 24 ball bearing – 6201 25 ball bearing – 6202 26 ball bearing – 6203 27 ball bearing – 6204 28 29 helogen lamp – 500 w 30 two coir wire – 10mm – aluminum 31 two coir wire – 6mm – aluminum 32 ceiling fan blade new model ( set ) 33 full auto star delta motor starter ( 9 to 12 amp ) 34 thimbles 25 mm to 600 mm 35 thimbles 25 mm to 600 mm 36 ac connection box complete with mcb 37 mcb 6 amp to 63 amp 38 heavy duty load break fuse switch panel fshf 63 n ( 415 volt ) 39 heavy duty load break fuse switch panel fshf 125 n ( 415 volt ) 40 heavy duty load break fuse switch panel fshf 250 n ( 415 volt ) 41 hbc fuse link – stkf – 250 a 42 hbc fuse link – stkf – 125 a 43 hbc fuse link – stkf – 63 a 44 ap fans 45 cfl frame with fittings 28w 46 cfl tube lights 28w 47 sheet 5 x 5 48 sheet 8 x 5 49 sheet 10 x 5 50 sheet 9 x 11 51 sheet 11 x 13 52 28 watt tube rod t5 53 electric chock 54 led lamps 3w, 5w, 10w, 15w 55 chok for 28 w tube rod 56 sub meter 5 30 amp 57 complete tube set 58 led tube set 59 fan rubber u shape 60 pvc gitti 61 auto wire 1 mm / 1.5mm / 2.5mm / 4mm 62 round flexible wire 1 mm 63 analog time switch fm / 1 250v j64 8b1 64 ms machine screws ¾’, 1’, 1.5’, 2.5’ 65 halogen light 30 w / 50w / 100w 66 street light led 30 w / 50 w / 100 w 67 mcb dp 32 amp, 40 amp 68 mcb 6 amp, 10 amp & 16 amp 69 mcb 63 amp...

Due Date : April 25, 2022

Tender Value : ₹ 5 Lakhs

View Tender
6
Municipal Corporation - Punjab

28035367 estimate for supply of material for maintenance of tubewells rs . 21 . 90 lacs dt 18/19 . 06 . 2021 , 3 pole power contractor 240/415 v 50/60 hz make l&t ml 2 , 3 pole power contractor 240/415 v 50/60 hz make l&t ml 2 , thermal overload relay direct mounting on ml 2/3 contractor 20 32 , 28 42 a upto 415v 50/60 hz make l&t , supply of spares ml 3 kit , supply of spares coil mc 3/ml2 240/ 440v , analogue time switch fm/1 quartz type qt ( daily ) 240 vac make l&t , electronic timer model micon 225 24 240 vac/dc 50/60 hz 3s 120s make l&t , side mounting add on aux . contact block 1 no + 1 nc mnx9 40 make l&t , pvc self adhesive electrical insulation tape size 1 . 90 cm x 20 mtr x 0 . 125 mm make steelgrip , standard duty prime capacitors cyclindrical from 1 . 3 to 33 . 1 kvar make l&t , three core pvc insulated copper conductor submersible cable 6mm make finolex , l&t , shalimar , polycab , national , havells , single core pvc insulated copper condutor cable make finolex , l&t , shalimar , polycab , national , havells 1mm , single core pvc insulated copper condutor cable make finolex , l&t , shalimar , polycab , national , havells 10mm , twin core pvc insulated copper condutor cable make finolex , l&t , shalimar , polycab , national , havells , porcelain kitkat fuse 200 amp , led tube set 20 w make phillips , bajaj , havells , oreva , crompton , or everady , bulb 100w make philips , bajaj , crompton or osram , anchor bolts size 10x75 , electric gloves , cutting wheel ( grene ) 4 , cutting wheel ( grene ) 5 , clamp meter make mastech model 266f , tool bag , ceiling fan 3 blades 1200mm make standard , bajaj , crompton , usha , orient , havells , chairs plastic make supreme or nikamal , rubber gasket suitable for is:1538 standards 6 , rubber gasket suitable for is:1538 standards 4 , gst @18%...

Due Date : June 18, 2021

Tender Value : ₹ Ref. Documents

View Tender
7
Northern Railway - Punjab

27973169 supply of 25 hp fully automatic star delta starter panel comprising of 1 tp mcb of 63 amp havells / standard / hpl: 1 no. , ( 2 ) power contractor ac 23 duly 32 amp delta .l&t / ls system / havells=3 nos. ( 3 ) . timer fully automatic starter make : eapl 1 no. , ( 4 ) ammeter suitable rating ae / nippen / rishabh or similar : 1 no., ( 5 ) current transfermor ae / nippen / rishabh or similar: 1 no. , ( 6 ) on push button with on element 22.5 mm dia : 1 no, ( 7 ) off push button with 22.5 mm dia:1 no , ( 8 ) indicating led type r.y.b. 22.5 mm dia : 3 nos, ( 9 ) on on indicating lamp led type 22.5 mm dia: 1 no., ( 10 ) control mb havells / standard make : 3 nos, ( 11 ) electronic motor protection rekay with following protection : 1 set a. overload protection b. current settings singh phases protection , c. phase failure protection, d. dry run protection, dry run can be by pass for general motor if require minilec make s2 cmr 1 with s2cts1 / 40 , ( 12 ) volts meter 0 500 volt ae / nippen or similar : 1 no. ( 13 ) volt meter selector switch surdhi / kaycee :1 no. ( 14 ) elecronic time switch for 24 hours automation operations of pump eapl / l&t : 1 no. ( 15 ) incoming and outgoing terminal suitable for alu cable reputed : 1 no., ( 16 ) fully automatic star delta starter panel model of 16swg crca sheet powder coated of siemens grey color wall mounting type as described above : 1 no25 hp fully automatic star delta starter panel comprising of 1 tp mcb of 63 amp havells / standard / hpl: 1 no. , ( 2 ) power contractor ac 23 duly 32 amp delta .l&t / ls system / havells=3 nos. ( 3 ) . timer fully automatic starter make : eapl 1 no. , ( 4 ) ammeter suitable rating ae / nippen / rishabh or similar : 1 no., ( 5 ) current transfermor ae / nippen / rishabh or similar: 1 no. , ( 6 ) on push button with on element 22.5 mm dia : 1 no, ( 7 ) off push button with 22.5 mm dia:1 no , ( 8 ) indicating led type r.y.b. 22.5 mm dia : 3 nos, ( 9 ) on on indicating lamp led type 22.5 mm dia: 1 no., ( 10 ) control mb havells / standard make : 3 nos, ( 11 ) electronic motor protection rekay with following protection : 1 set a. overload protection b. current settings singh phases protection , c. phase failure protection, d. dry run protection, dry run can be by pass for general motor if require minilec make s2 cmr 1 with s2cts1 / 40 , ( 12 ) volts meter 0 500 volt ae / nippen or similar : 1 no. ( 13 ) volt meter selector switch surdhi / kaycee :1 no. ( 14 ) elecronic time switch for 24 hours automation operations of pump eapl / l&t : 1 no. ( 15 ) incoming and outgoing terminal suitable for alu cable reputed : 1 no., ( 16 ) fully automatic star delta starter panel model of 16swg crca sheet powder coated of siemens grey color wall mounting type as described above : 1 no, 25 hp fully automatic star delta starter panel comprising of 1 tp mcb of 63 amp havells / standard / hpl: 1 no. , ( 2 ) power contractor ac 23 duly 32 amp delta .l&t / ls system / havells=3 nos. ( 3 ) . timer fully automatic starter make : eapl 1 no. , ( 4 ) ammeter suitable rating ae / nippen / rishabh or similar : 1 no., ( 5 ) current transfermor ae / nippen / rishabh or similar: 1 no. , ( 6 ) on push button with on element 22.5 mm dia : 1 no, ( 7 ) off push button with 22.5 mm dia:1 no , ( 8 ) indicating led type r.y.b. 22.5 mm dia : 3 nos, ( 9 ) on on indicating lamp led type 22.5 mm dia: 1 no., ( 10 ) control mb havells / standard make : 3 nos, ( 11 ) electronic motor protection rekay with following protection : 1 set a. overload protection b. current settings singh phases protection , c. phase failure protection, d. dry run protection, dry run can be by pass for general motor if require minilec make s2 cmr 1 with s2cts1 / 40 , ( 12 ) volts meter 0 500 volt ae / nippen or similar : 1 no. ( 13 ) volt meter selector switch surdhi / kaycee :1 no. ( 14 ) elecronic time switch for 24 hours automation operations of pump eapl / l&t : 1 no. ( 15 ) incoming and outgoing terminal suitable for alu cable reputed : 1 no., ( 16 ) fully automatic star delta starter panel model of 16swg crca sheet powder coated of siemens grey color wall mounting type as described above : 1 no...

Due Date : June 02, 2021

Tender Value : ₹ Ref. Documents

View Tender
8
Rail Coach Factory - Punjab

25704675 supply of , timer surface din rail mounting time switch, 24 hours & 7 days, 240 vac, 50hz, 10 amps, battery operated, on off adjustment should be digital , minimum programing 1 minut with back up of 6 year , 28 memory locations , current capacity 16 a, weekly program, with 2 changeover(2 co) 14 programs per channel., make: indoasian model no. tda43111 or ge, mds, l&t, legrand, hager only....

Due Date : October 30, 2020

Tender Value : ₹ Ref. Documents

View Tender
9
Rail Coach Factory - Punjab

25419648 supply of , timer surface din rail mounting time switch, 24 hours & 7 days, 240 vac, 50hz, 10 amps, battery operated, on off adjustment should be digital , minimum programing 1 minut with back up of 6 year , 28 memory locations , current capacity 16 a, weekly program, with 2 changeover(2 co) 14 programs per channel., make: indoasian model no. tda43111 or ge, mds, l&t, legrand, hager only....

Due Date : September 15, 2020

Tender Value : ₹ Ref. Documents

View Tender
10
Municipal Corporation - Punjab

22008115 supply of material for maintenance of tube well and mps to o and m cell 1. 3 pole power contactor 240 / 415 v make l&t type ml 2 2. 3 pole power contactor 240 / 415 v make l&t type mnx32 3. 3 pole power contactor 240 / 415 v make l&t type mnx4o 4. analogue time switch make l&t 5. shunt capacitor make l&t standard duty prime capacitors cylindrical series ltccv s to 25kvar rating 6. shunt capacitor make l&t ltxl ultra heavy duty capacitors box series ltbcu 20 and 25 kvar rating 7. selector switch ass for 3 phase submersible motor panel 8. selector switch ass for 3 phase submersible motor panel 9 ct coil 60 / 5, 10 ct coil 400 / 5, 11 panel led indicator, 12 connection plate 60 / 6, 13 tonggle switch on off on, 14 copper thimbles 35mm u type, 15 copper thimbles 35mm ring type, 16 ampere meter size 96mm x96mm ct type 0 6oamp, 17 ampere meter size 96mm x96mm ct type 0 400amp, 18 volt meter 500 volts size 96mmx96mm 19 single core pvc insulated copper conductor cable make finolex, l&t, rr, kei, polycab, national, havells 1 mm, 20 single core pvc insulated copper conductor cable make finolex, l&t, rr, kei, polycab, national, havells 10 mm, 21 three core pvc insulated copper conductor submersible cable 10mm make finolex, l&t, rr, kei, polycab, national, havells 22 plate made of ms angle with bakelite sheet suitable for fixing 200amp 3 nos kftkat 23 led tube set 20w make crompton, bajaj, philips or eguilant 24 bulb 200w make crompton, bajaj, philips or eguilent, 25 slipering suitable for 167 hp slipring induction motor, 26 limit switch mel type, 27 cob hathodi six hole, 28 mel type ocb core with no volt coil, 29 cob ct coil 400 amp...

Due Date : October 14, 2019

Tender Value : ₹ 21.70 Lakhs

View Tender
11
Department Of Local Bodies - Punjab

17963282 supply of street light maintenance material: 23 supply of gi bend 23.01 40mm dia 34 long 23.02 32mm dia 34 long 24 supply of tube holder for 4x14 t 5 fitting 25 supply of electronic ballast 36 / 40 w choke ( ftl ) ( philips crompton, bajaj, ge, havells, wipro ) supply of pvc insulated single core frls copper 26 conductor cable ( 1.5mm2 ) as per csr isi marked ( bonton, polycab, hpl, tamra, gemsccab, kel, ecko, grandlay, ultracab, rrkable, anchor sci, rallison, vinay, l&t, havells ) 27 supply of 4 pole power contractor 100a 4 way ( l&t, seimens, schneider ) 28 supply of digital time switch ( l&t, seimens, schneider ) 29 supply of led driver 90 / 100 w ( philips, crompton, bajaj ) ...

Due Date : November 15, 2018

Tender Value : ₹ 49.89 Lakhs

View Tender
12
Diesel Locomotive Works - Punjab

15823618 analog time switch series fm / 1, type qt daily dial with battery back up in built , 15 min on / off setting din channel mounting 240 plus minus 10 percent 50hz ac supply, battery operated real time clock in 24 hours formet, make: l and t, siements, dic, minilec or equivalant...

Due Date : April 23, 2018

Tender Value : ₹ Ref. Documents

View Tender
13
Municipal Corporation - Punjab

14866247 purchase of electrical material for repair of starter panels and other electrical repair of tubewells and disposals of all zones terminal kit , 3 pole power contractors , motor protection relay , main switch , change over switch , timer et , time switch , single phase preventer vsp d 2 minilac kit kat 100 200 500 amp. with extension patti — h.r.c. fuses p/o thimble copper 38 ampare meter 0 to 100 amp. (rishab, essma make) 39 volt meter 0 to 500 amp. (rishab, essma make) 40 spare coil for ml 3 contactor l&t make spare coil for ml 4 contactor l&t make 42 indicate light for pannel 43 push button with element 44 — elcb 100 amp.minilaw 45 mccb long terminal doible copper l 48 small terminal double copper i 49 gutka double copper with assembly pvc copper submersible cable , pvc tape role , amp. tape role etc...

Due Date : January 29, 2018

Tender Value : ₹ 20 Lakhs

View Tender
14
Punjab State Power Corporation Limited - Punjab

14771007 procurement of electrical items (non standardized items) covered under ea group for the year 2017 18 (1) icdp switch 32 amp with operating handle right side as per isi 10027/2000 make:, c&s, siemens, l&t, ssk, havell, mds (2) ictp switch 32 amp confirming to is 10027/2000 make:, c&s, siemens, l&t, ssk, havell, mds. (3) ictp 63 amp. with operating handle right side conforming to is 10027/2000 make:, c&s, siemens, l&t, ssk, havell, mds (4) ictp 100 amp. with operating handle right side conforming to is 10027/2000. make:, c&s, siemens, l&t, ssk, havell, mds (5) 415v,50hz,4 pole 200amp. change over switch with fuse as per is 13703 & make:, c&s, siemens, l&t, ssk, havell, mds (6) 24hrs. time switch for auto control of street lights as per is 13947 4 1. ( minimum time adjustment 15 mintues) make:, c&s, siemens, l&t, ssk, havell, mds. (7) switches piano type 5 amp. is 3854/1997.make: anchor, havell, ssk (8) switch piano type, 15 amp. is 3854/1997. make: anchor, havell, ssk (9) two way switch 5amp. is 3854/1997. make: anchor, havell, ssk (10) fuse switch unit 100 amp 415 volt.fsh 100n with hrc fuse with operating handle right side as per isi 13947/p iii 1993,with enclosure make:, c&s, siemens, l&t, ssk, havell, mds , etc....

Due Date : February 15, 2018

Tender Value : ₹ Ref. Documents

View Tender
15
Central Public Works Department - Punjab

14058454 maintenance of electrical installation and fans including repair maintenance of pump set for non residential and repair maintenance of 110 kva diesel generator set of central excise department at sian bolpur west bengal sh supply, installation, testing and commissioning 400 amps 4 pole onload change over and 24 hours analog time switch...

Due Date : November 02, 2017

Tender Value : ₹ Ref. Documents

View Tender